Products

The S36 has a fixed grinding head, with grinding wheel angles of 0, 15 or 30 degrees available. The distance between centers is 650mm and the maximum workpiece weight is 150kg. Proven components have been used in the machine. These include a Granitan® machine bed and a workhead with high-precision roller bearings.

uniLoad is offered on the basis of a linear portal cell with two parallel grippers and is suitable for shaft components up to a length of 350 mm and a diameter of max. 100 mm. It thus covers a large proportion of the component ranges produced on these machines. The parts are supplied via a standardized, adjustable V-belt. The housing for the base module, which is provided with a loading hatch as standard, has been adapted to suit the machine design and enables safe and clean operation of the system.

Lantek Expert V2021 includes 25 innovative cutting, punching and shearing strategies that offer more options for efficient destruction of slugs and to redistribute parts throughout the entire metal sheet to optimize the rigidity of the skeleton and further reduce waste. The system digitalizes scrap with previous cuts, identifies areas on the sheet available and allows for any part to be cut within that space, all with a simple drag-and-drop operation.

The new duo of VOLLMER grinding machines designed for machining carbide-tipped circular saw blades, is made up of the CS 860 and CSF 860.

Ideal for everyday use, the CC e-motion offers unbeatable accuracy and flexibility for high or low volume turning, inspection and finishing operations while providing fast, seamless machine integration. Optimum for either heavy duty or precision machining of any workpiece geometry, the chuck allows users to not only program the cutting cycle, but the jaw movement and gripping cycle as well.

In contrast to conventional zero-point tooling systems, monitoring sensors were specifically designed for the MTS 4.0. Each of the four chucks in the MTS 4.0 base plate are equipped with a sensor to check the presence of the workpiece holder and to monitor the actuating piston. There is also a force sensor to measure the clamping power. Similar to previous MTS versions, the chuck is operated with compressed air for opening, re-clamping and cleaning functions.

Both the SmartMoma and the Nextage robots will be shown in working action during the IMTS 2022 in Chicago. The SmartMamo will transport full and empty cassettes between the grinding machines and the post‐grinding station. The Nextage humanoid robot will perform tasks such as tubing and labeling.

EXAIR's 3D model and CAD (Computer-aided design) library provides 70+ native extensions including DWG, Catia, Inventor, STL, STP, SAT, Solidworks, Sketch Up and more, for immediate viewing and download. Products on EXAIR.com include a full diagram and description of how they work with a wide range of download formats, and even the ability to inspect, turn and manipulate the product with a full interactive 3D viewer.

Featured on new GF Machining Solutions' CUT P Pro Series wire EDMs, the iWire function works in tandem with the company's Intelligent Spark Protection System (ISPS), both of which are part of the company's Uniqua control.

The pneumatic clamps of the GN 860 series now have hardened, ground bearing bushings and tempered bearing pins for significantly reduced wear. No meaningful alterations were observed in testing for over 250,000 cycles. Structural reinforcement of the sheet steel housing reduces wear-inducing vibrations during operation, which makes a difference even under lower loads. And, finally, the new one-way restrictor in the cylinder enables smoother travel to extend the lifespan of the piston.

At IMTS 2022, HEIDENHAIN will be entering a new chapter in shop-floor-centered manufacturing by unveiling the new TNC7 in North America (Booth #135716). This standard-setting CNC control supports users from initial design to final machining, from one-off jobs to serial production, and from simple slots to complex contours.

Platinum Tooling, the importer and distributor of live tools, angle heads, marking tools, Swiss tools and multi-spindle tools manufactured by various global suppliers, is now the North American importer of the QUICK® knurling and marking tools from Hommel & Keller.