Products

The toolless jaw quick-change system reduces set-up times to a minimum, therefore increasing the productivity and flexibility of the entire system. Dowel pins and a corresponding bore hole are available options, serving as additional mounting aides. For example, in the case of asymmetric finger pairs, this ensures that they can only be mounted in the correct position.

The precise and hard ball contact surfaces enable optimum force transmission with extremely high positioning and repeat accuracy. In addition, Schneeberger ball screws stand out due to their quiet, torque-constant running behavior. Equally important are the accompanying low heat generation, minimal wear and long service life.n

The C7015 ultra-compact IPC, which measures just 85 x 167 x 43 mm, is cost effective and universally suited to high-performance automation, visualization and communication purposes. Its applications range from classic machine control to the decentralized edge computing utilized in advanced Industrie 4.0 concepts.

The stainless-steel construction of these atomizing nozzles adds to their durability and corrosion resistance. EXAIR air atomizing spray nozzles are available with 1/8, 1/4 and 1/2 NPT connections and in a variety of spray patterns to meet your needs. All models are adjustable, have an available mounting bracket and come with our 5 year Built to Last Warranty and are CE compliant.

The carabiner and lanyard kit removes the potential of dropping items in areas with an increased safety risk, or above environments where retrieval would be time consuming, difficult or impossible. As a result, the system makes working safer, faster and removes the danger and cost associated with losing tools and equipment. The kit is intended for applications involving working at height or environments such as marine. The carabiner and lanyard kit can also be used to remove the risk of an operator becoming separated from machinery, such as connecting a pilot of a boat or jet ski to a kill switch.

CNC collet chucks and collets are an alternative to pneumatic or hydraulic workholding devices and are well-suited for high production runs. Standard shapes such as round, square and hexes can be held accurately and quickly compared to a three or four jaw chuck.

Go and No-Go Ring Gages are manufactured with hardened tool steel for exceptional durability and feature a fully knurled circumference for maximum gripping ability and safety. No-Go gages are clearly marked with a red ring. UNC and UNF gages have a 2A tolerance. UNC gages are available in 19 sizes from #2-56 to 2-4 ½ and UNF gages are available in 19 sizes from #0-80 to 1 ½ -12. Metric and metric fine gages have a 6g tolerance. Metric gages are available in 19 sizes from M2x.4 to M68x6 and metric fine gages are available in 19 sizes from M8x1 to M48x1.

The catalog features the full Enerpac portfolio including the latest new products as well as other lines like Mirage machining, Equalizer flange tools, Sweeney aerospace tools and more. Each product series contains all the specifications, diagrams, selection charts and accessories needed to choose the right tool model and/or hydraulic system for the application. Customers and professionals can browse the catalog by product category or go directly to a preferred model number using the index. And as in all the previous catalogs, the yellow pages section contains helpful information on the basics of hydraulics and safety instructions, along with tips for tool operation.

The reoptimized design of the new JSE510 offers unparalleled versatility based on the previous version of this product range. The new series targets general engineering, contract manufacturers and job shops, as well as the aerospace, medical and automotive industries. The design is reoptimized to stand up to tough milling applications with a versatile carbide grade, advanced polished SIRA coatings and a strong, sharp cutting edge. To extend tool life further, these tools offer vibration-damping variable pitch design and optimized helix.

DX8, DX6 and DX4 vises were designed using Finite Element Analysis—providing 30% less horizontal push-back deflection than previous DX models. Less vise-body deflection translates to more stability and a lifetime of dimensional precision—setting a new standard in precision flatness, parallelism and repeatability. The DX8 CrossOver® vise features the same bed height and keyway to the stationary jaw face as the D810. The DX8 also features a redesigned nut with less weight, a new brush seal design, and a larger stronger bearing pack for more durability.

The ANCA Insert Solution, based on the MX tool grinding machine platform, offers work-holding, automation and supporting tool programming software to produce a diverse range of rotary endmill and drill inserts. Inserts that feature common locating datums and clamping features are an ideal fit for the ANCA Insert Solution.

For manufacturers who produce different components on the same line, and therefore need to regularly change grippers, this system is highly beneficial. One and the same programmable gripper solution is used to handle all blanks, regardless of shape and size. The transition is automatic and takes less than two minutes.