Walter USA LLC has announced the availability of the Haimer Safe-Lock clamping system with specially modified Walter Prototyp solid carbide mills.
The problem of pull-out or micro-creep is prevalent in high speed machining applications and when working with difficult to machine materials like Titanium and Inconel. Conventional chucks are not fully capable of preventing this effect, not even when using the highest clamping forces. That's where the Safe-Lock clamping solution comes"
With the aid of special spiral grooves ground into the tool shank, the Safe-Lock's carrier elements, in addition to friction locking in the chuck, provide positive locking as well as high precision clamping. Also, Safe-Lock's optional cooling channels, included with all Safe-Lock shrink fit chucks, bring coolant directly to the cutting edge, extending tool life by as much as 100 percent. As a result of these factors, solid carbide end mills from Walter Prototyp with Safe-Lock allow users to benefit from maximum cutting parameters, and provide for the highest possible cost efficiencies that the tool and machine have to offer. This is true both for roughing as well as for finishing operations. Walter Prototyp end mills with Safe-Lock, available in 12 to 40mm diameters are able to increase productivity, provide run out accuracy, boost tool life and ensure extremely high levels of precision while drastically reducing scrap—vital for expensive workpieces so often encountered in high speed, high performance machining.
Solid carbide end mills from Walter Prototyp with Safe-Lock grooves are available through the Walter Xpress Service. This service was created for a defined range of special tools, where the delivery times are a maximum of two weeks.
Workholding device that affixes to a mill, lathe or drill-press spindle. It holds a tool or workpiece by one end, allowing it to be rotated. May also be fitted to the machine table to hold a workpiece. Two or more adjustable jaws actually hold the tool or part. May be actuated manually, pneumatically, hydraulically or electrically. See collet.
Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.
Available in diameters from 1/8" to 1", the MA267/MA263 Advance tools are excellent for machining all other ISO N materials, such as copper, brass, bronze and magnesium-based alloys, in addition to aluminum. With a cylindrical shank, these tools are available with or without chip-…
When compared to competing drills, the DC180 Supreme has a tool life that is about 50% longer. An additional benefit for the DC180 drill is universal application at the highest cutting speeds. The drill is suitable for high production volume applications with a large number of holes, such as in the…
The lineup of products consists of three categories of tools. Supreme tools indicate the highest level of technology and performance available. Advance tools indicate products efficiently balanced between price and performance and Perform tools are products that provide an economical solution with…
The inserts feature three cutting edges at a 50° copying angle. Compared to the WL25 indexable inserts, which measure 25 mm per side, the WL17 inserts measure 17 mm per side. The WL25 inserts are now additionally offered in W0110-C Walter Capto tools and the W1211 QuadFit exchangeable head for…
The MA230 Advance solid carbide milling cutting is for universal machining of steel, stainless steel, cast iron and high-temperature superalloys (ISO P, M, K and S workpiece groups) at the highest level. The MA230 Advance cutter is for high-performance roughing and finishing and enables reliable…
The primary applications for the DC183 Supreme solid carbide drill are machining steel, cast iron and non-ferrous materials (ISO P, K and N). The secondary applications are super alloys and stainless-steel materials (ISO S and M). The main targeted areas of use are automotive, aviation and energy…
The WKK25G grade is a true specialist when milling today’s cast irons (ISO K material group), such as ductile cast iron. Specifically, the grade is ideal for unfavorable milling conditions, such as interrupted cuts, and for wet machining applications. The grade meets the most stringent requirements…
Ideal for holemaking without a pilot drill up to 10×Dc, the inserts provide time savings that boost productivity. The inserts were designed to achieve maximum tool life in stable machining conditions thanks to the wear resistant WPP25 grade with HIPIMS technology. The grade has a particularly hard…
The new grade is Walter’s response to the upwards trend towards milling steel with difficult machining properties and wear-resistant stainless steel, such as found in applications in the energy and aviation industries. WSM35G meets the most stringent requirement for process reliability, which is…
The curved wiper cutting edge is a unique feature that makes the wiper action universal across various material groups such as steels, stainless steels, cast irons or even super alloys. The wiper action can be used to reduce machining time by using double the feed rate, while imparting the same…
PRODUCTS
