Walter USA LLC has announced the availability of the Haimer Safe-Lock clamping system with specially modified Walter Prototyp solid carbide mills.
The problem of pull-out or micro-creep is prevalent in high speed machining applications and when working with difficult to machine materials like Titanium and Inconel. Conventional chucks are not fully capable of preventing this effect, not even when using the highest clamping forces. That's where the Safe-Lock clamping solution comes"
With the aid of special spiral grooves ground into the tool shank, the Safe-Lock's carrier elements, in addition to friction locking in the chuck, provide positive locking as well as high precision clamping. Also, Safe-Lock's optional cooling channels, included with all Safe-Lock shrink fit chucks, bring coolant directly to the cutting edge, extending tool life by as much as 100 percent. As a result of these factors, solid carbide end mills from Walter Prototyp with Safe-Lock allow users to benefit from maximum cutting parameters, and provide for the highest possible cost efficiencies that the tool and machine have to offer. This is true both for roughing as well as for finishing operations. Walter Prototyp end mills with Safe-Lock, available in 12 to 40mm diameters are able to increase productivity, provide run out accuracy, boost tool life and ensure extremely high levels of precision while drastically reducing scrap—vital for expensive workpieces so often encountered in high speed, high performance machining.
Solid carbide end mills from Walter Prototyp with Safe-Lock grooves are available through the Walter Xpress Service. This service was created for a defined range of special tools, where the delivery times are a maximum of two weeks.
Workholding device that affixes to a mill, lathe or drill-press spindle. It holds a tool or workpiece by one end, allowing it to be rotated. May also be fitted to the machine table to hold a workpiece. Two or more adjustable jaws actually hold the tool or part. May be actuated manually, pneumatically, hydraulically or electrically. See collet.
Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.
The MC377 Advance, with protective chamfer, corner radii, and center cutting edge, can be used for chrome-nickel and steel materials, as well as titanium. The MD377 Supreme is a solid carbide milling cutter with a corner radius and central internal coolant engineered for titanium machining.
The MC128 Advance boasts a wide diameter range of 1/4 -3/4 in. (2-25 mm) with a TiAIN coating for universal use. WJ30TF grade is available for ISO materials P, M, K, and S. The MC128 Advance is well suited for die and mold work as well as general metalworking. The MD128 Supreme provides 64% more…
With this new tool, V or D-style inserts with just two cutting edges and lower stability (ISO VBMT, VCMT, DCMT) are replaced with triangular cutting inserts with three cutting edges and high stability. These three-edged inserts allow for a 50° undercut angle, ideal for profiling operations. Since…
The Walter MD838 Supreme (conical version) has an effective radius of 250-1000 mm, a corner radius of 0.5 - 4.0 mm and is available in diameters of 6-16 mm. Walter also offers a version of this tool with ConeFit exchangeable head. The MD839 Supreme (tangential version) has an effective radius of…
High tool life is achieved thru WEP10C coated cermet grade with multilayer TiCN TiAlN PVD coating and fine cermet micro grain. The combination of edge preparation and grade also ensures dimensional stability over long periods of time, which boosts productivity in mass production
The unique TiAlN-Al2O3 multilayer coating system makes the WSP45G both hard and tough, and thus extremely resistant to abrasive wear and high temperatures, with controlled residual stresses and less flank wear, all boosting tool life. A special mechanical post-treatment improves hairline crack…
Enhancements to the Xtra·tec XT M5130 milling cutter, including a new clearance angle of 7° have added to this universal tool's existing benefits of high performance, high surface quality, exceptional reliability and safety, and outstanding versatility. The M5130 handles a wide array of…
Accure·tec adaptors are ideally suited for the Walter Xtra·Tec® XT milling cutter range. This makes the system highly versatile. For example, for components with deep cavities in aircraft construction and aerospace industry in general, as well as the automotive, energy, die/mold, and general…
The Xtra·tec XT M5012 is highly cost-effective thanks to inserts being offered in a fully ground configuration for maximum precision, or fully sintered configuration for maximum cost efficiency. The bodies are offered in either ScrewFit or shell mount and with two pitches for different applications.
The M5137 Xtra·tec® XT boasts reduced process costs thanks to its Tiger·tec® coating and six cutting edges per indexable insert. This translates to simple tool selection and low cutting material costs, and highly cost-effective operation due to low unit costs.
PRODUCTS
