Walter USA LLC has announced the availability of the Haimer Safe-Lock clamping system with specially modified Walter Prototyp solid carbide mills.
The problem of pull-out or micro-creep is prevalent in high speed machining applications and when working with difficult to machine materials like Titanium and Inconel. Conventional chucks are not fully capable of preventing this effect, not even when using the highest clamping forces. That's where the Safe-Lock clamping solution comes"
With the aid of special spiral grooves ground into the tool shank, the Safe-Lock's carrier elements, in addition to friction locking in the chuck, provide positive locking as well as high precision clamping. Also, Safe-Lock's optional cooling channels, included with all Safe-Lock shrink fit chucks, bring coolant directly to the cutting edge, extending tool life by as much as 100 percent. As a result of these factors, solid carbide end mills from Walter Prototyp with Safe-Lock allow users to benefit from maximum cutting parameters, and provide for the highest possible cost efficiencies that the tool and machine have to offer. This is true both for roughing as well as for finishing operations. Walter Prototyp end mills with Safe-Lock, available in 12 to 40mm diameters are able to increase productivity, provide run out accuracy, boost tool life and ensure extremely high levels of precision while drastically reducing scrap—vital for expensive workpieces so often encountered in high speed, high performance machining.
Solid carbide end mills from Walter Prototyp with Safe-Lock grooves are available through the Walter Xpress Service. This service was created for a defined range of special tools, where the delivery times are a maximum of two weeks.
Workholding device that affixes to a mill, lathe or drill-press spindle. It holds a tool or workpiece by one end, allowing it to be rotated. May also be fitted to the machine table to hold a workpiece. Two or more adjustable jaws actually hold the tool or part. May be actuated manually, pneumatically, hydraulically or electrically. See collet.
Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.
WBH20 is a grade well suited for ISO-H Group of material such as for hard turning applications. WBS10 is well suited for ISO-S materials, specifically nickel-based (such as Inconel), iron-based (such as Udimet) or cobalt-based (such as Hayens).
Available in diameter sizes ranging from 0.562-1.375 in. and 16-42 mm with 2, 3, 4 x Dc, the new drill delivers maximum process reliability with simple and efficient chip removal, two coolant channels and polished flutes. Superior protection against friction is provided by the D3120 hardened and…
The M2471 milling cutter, ideal for the aerospace and energy industries, boasts a high metal-removal rate even on low-performance machines thanks to its soft cutting geometries and positive cutting characteristics. It brings all the benefits of single-sided round inserts to double-sided round…
More cost-effective than comparable systems but just as easy on tools, the AB735 synchronous threading adaptor maximizes tool performance. In addition to the minimized wear, the modular design of the adaptor also contributes to cost-efficiency: Exchangeable front pieces for different thread sizes…
These new grades complement Walter's previously released WBH10C coated CBN and WBH10 and WBH20 CBN grade ideal for high temperature stability in hard metal turning. These inserts also have the option of chip breaker (TM-M2) for trouble shooting and wiper (MW2) for exceptional surface finish…
The MC025 Advance is available in diameters from 1/8-1 in. (1-25 mm). A single grade is offered for universal applications for steel, stainless steel, cast iron and materials with difficult cutting properties as well as its ability to lower inventory costs.The MD025 Supreme solid carbide milling…
Tangentially mounted grooving insert with a robust seating surface also ensures maximum stability. The insert and pocket design features an axial key stop for added stability against the side cutting (axial) forces. Precision cooling on the flank surface is offered as a standard feature for longer…
With the special flute geometry, the chips (swarf) are evacuated effectively. This means that hole depths of up to 12 x Dc can be easily achieved. Oil or emulsion can both be used as a coolant with these drills. For deeper holes beyond 8 x Dc, Walter has also introduced a corresponding line of…
The exceptionally smooth yet hard coating improves surface quality, which, in turn, significantly reduces torque requirements. Intended for blind hole and through hole threads and thread depths up to 3.5 x DN in steel, it has also shown good results in machining cast iron and aluminum. The TC470…
The mill is best suited to machining steel, stainless steel, cast iron, non-ferrous material and materials with difficult cutting properties. This wide range of uses results in lower tooling and administrative costs, as does the fact that its 90° approach angle dramatically decreases the need for…
PRODUCTS
