Walter has introduced single-sided indexable inserts with new HU5 geometry. These HU5 inserts can dramatically boost productivity particularly in rough machining of stainless steels and heat-resistant superalloys and secondarily in steel. They are typically used in machining AISI 316 material, Inconel 718 and titanium.
The main cutting edge, which is protected by a negative chamfer, prevents insert fractures when machining hard scales and heat affected zones and thus optimizes insert performance in forged parts. Components with interrupted cuts and other demanding machining operations benefit as well.
Compared to double-sided negative inserts, HU5 has a large seating surface. This increases stability and permits greater cutting depths, feed rates, and metal-removal rates. In addition to the stable seating, the key factor in this improved productivity is the combination of HU5 geometry and Walter’s Tiger·tec Silver grades. This combination leads to increased tool life up to 75%.
With HU5 geometry, the curved cutting edge and deep chip groove produce low cutting forces even at high feed rates, reducing heat buildup. The variable rake angle at the corner radius allows for lower cutting forces and increases tool life. Available in grades WPP10S, WPP20S, WMP20S, WSM20S and WSM30S, the HU5 geometry rounds out the extensive Walter product range in the areas ISO S and M, leading to a total of 12 insert shapes in six grades.
Angle of inclination between the face of the cutting tool and the workpiece. If the face of the tool lies in a plane through the axis of the workpiece, the tool is said to have a neutral, or zero, rake. If the inclination of the tool face makes the cutting edge more acute than when the rake angle is zero, the rake is positive. If the inclination of the tool face makes the cutting edge less acute or more blunt than when the rake angle is zero, the rake is negative.
Stainless steels possess high strength, heat resistance, excellent workability and erosion resistance. Four general classes have been developed to cover a range of mechanical and physical properties for particular applications. The four classes are: the austenitic types of the chromium-nickel-manganese 200 series and the chromium-nickel 300 series; the martensitic types of the chromium, hardenable 400 series; the chromium, nonhardenable 400-series ferritic types; and the precipitation-hardening type of chromium-nickel alloys with additional elements that are hardenable by solution treating and aging.
Walter has announced several extensions to its Tiger-tec Gold inserts, all of which possess the features that have made it so successful: A smooth rake face for excellent friction characteristics; optimal wear detection due to its gold-colored top layer; an especially tough cutting edge for maximum…
The new WCK10 ceramic cutting grade from Walter is optimized for roughing gray cast iron at high cutting speeds, with either continuous or interrupted cutting. The inserts deliver improved productivity, process reliability and longer tool life due to their new Si3N4 wear-resistant ceramic cutting…
Walter has introduced its ISO H Advance Line of solid-carbide milling cutters, consisting of seven new cutter families specially tailored to the requirements of hard machining (up to 63 HRC). These new cutters include mini and multi-flute, shoulder/slot, ball-nose and high-feed milling cutters,…
Walter has introduced two new insert grades in its Perform Line of turning tools, the WPV10 and WPV20. These versatile, cost-effective inserts are suitable for users whose machines are limited in cutting parameters due to their stability and performance, and who need a versatile insert that can…
Walter has introduced the TC120, TC121 and TC122 Supreme, three new blind-hole taps that combine maximum performance in steel with improved tool life and process reliability. These new entries in the Walter Supreme line have been specially developed for machining steel.
Walter has expanded the range of its innovative T2711/T2712 thread milling cutter family for cutting large threads with two new tool bodies for the M56 and M64 threads and three new thread milling cutter inserts. Walter's multiple-row T2711/T2712 thread milling cutter family, which can…
Walter has expanded its popular Paradur HT HSS-E blind-hole tap range by adding UNC thread dimensions. Previously available in dimensions M4-M36 and M10×1-M33×2, Walter has now expanded the range of the taps to include dimensions UNC 1/4-UNC 1.
The new Walter Cut MX grooving and parting tool reportedly improves accuracy, stability and process reliability by adopting and improving on proven technology. These new indexable inserts have four cutting edges per insert.
The new MD133 Supreme milling cutter from Walter, designed specifically for dynamic milling, delivers increased process reliability, particularly during unmanned operation. It reportedly boosts productivity thanks to a higher metal-removal rate and a reduction in machining time.
Walter has introduced the Walter has introduced the M2471, a copy milling cutter with excellent cost efficiency thanks to its high metal-removal rate -- even on low performance machines, coupled with lower cutting material costs resulting from its eight cutting edges (four per side) per insert.…
PRODUCTS
