Walter has introduced single-sided indexable inserts with new HU5 geometry. These HU5 inserts can dramatically boost productivity particularly in rough machining of stainless steels and heat-resistant superalloys and secondarily in steel. They are typically used in machining AISI 316 material, Inconel 718 and titanium.
The main cutting edge, which is protected by a negative chamfer, prevents insert fractures when machining hard scales and heat affected zones and thus optimizes insert performance in forged parts. Components with interrupted cuts and other demanding machining operations benefit as well.
Compared to double-sided negative inserts, HU5 has a large seating surface. This increases stability and permits greater cutting depths, feed rates, and metal-removal rates. In addition to the stable seating, the key factor in this improved productivity is the combination of HU5 geometry and Walter’s Tiger·tec Silver grades. This combination leads to increased tool life up to 75%.
With HU5 geometry, the curved cutting edge and deep chip groove produce low cutting forces even at high feed rates, reducing heat buildup. The variable rake angle at the corner radius allows for lower cutting forces and increases tool life. Available in grades WPP10S, WPP20S, WMP20S, WSM20S and WSM30S, the HU5 geometry rounds out the extensive Walter product range in the areas ISO S and M, leading to a total of 12 insert shapes in six grades.
Angle of inclination between the face of the cutting tool and the workpiece. If the face of the tool lies in a plane through the axis of the workpiece, the tool is said to have a neutral, or zero, rake. If the inclination of the tool face makes the cutting edge more acute than when the rake angle is zero, the rake is positive. If the inclination of the tool face makes the cutting edge less acute or more blunt than when the rake angle is zero, the rake is negative.
Stainless steels possess high strength, heat resistance, excellent workability and erosion resistance. Four general classes have been developed to cover a range of mechanical and physical properties for particular applications. The four classes are: the austenitic types of the chromium-nickel-manganese 200 series and the chromium-nickel 300 series; the martensitic types of the chromium, hardenable 400 series; the chromium, nonhardenable 400-series ferritic types; and the precipitation-hardening type of chromium-nickel alloys with additional elements that are hardenable by solution treating and aging.
The aim of the Perform drill line is to offer customers the same outstanding Walter quality they have come to expect, but without having to pay for a level of performance that offers them no benefits at all. The DC150 Perform affords significant advantages primarily where users need to machine…
The new M2131 Sky·tec Ramping Cutter from Walter reportedly brings new, higher levels of process reliability to the machining of nonferrous metals such as the aluminum wrought alloys or aluminum lithium alloys often used in aircraft structural components. The cutter allows shorter machining time…
Walter says its double-sided ISO indexable inserts with RP7 geometry provide maximum process reliability in rough turning by combining a ground contact surface with an optimized profile that has a tailored protective chamfer to guard against fracturing. The RP7 benefits from a new design that…
Walter has announced the addition of the M4256, M4257 and M4258 high-performance helical milling cutters to its M4000 family. The M4000 program offers the advantages of a system insert concept that allows one insert style to be used in a variety of tools, permitting a wide array of milling…
The WDN10 from Walter, a high-performance and wear-resistant polycrystalline diamond (PCD) insert delivers outstanding hardness, a low coefficient of friction and minimum heat distortion. This helps result in maximum productivity and cost efficiency in the high-speed machining of nonferrous…
Walter has introduced the Walter BLAXX M3016, a heavy-duty milling cutter with the ruggedness and power needed to make heavy cuts seem easy. The M3016 tackles ISO material groups P, M and K, and difficult applications such as machining frames made from cast iron for large molds, or housings for…
Walter has introduced the Tiger·tec Silver grade WSM45X, creating an indexable inserts with high-temperature resistance, improved wear resistance, outstanding toughness, and exceptional hardness. These key features of inserts in the new Tiger·tec Silver grade WSM45X can boost performance by up to…
What if your tools could talk to you, providing you with timely information about their status and the conditions they were encountering, as well as tips that enhance your specific application? With Walter’s new wear-optimization app, they can.
Walter has introduced the Walter Titex DB133 Supreme, a solid-carbide microdrill that reportedly delivers tight tolerances, high-quality surface finishes, superior process reliability and longer tool life. The difference for the DB133 Supreme begins with the use of grades WJ30EL and WJ30ER,…
Walter has introduced a new version of its Walter Prototyp Proto▪maxST high-performance, solid-carbide milling tool designed for optimal performance on steel with secondary applications in stainless steel. This new entry in the Walter Prototyp lineup is called the Proto·maxST Z-5, available with…
PRODUCTS
