Walter has introduced the TC470 Supreme solid carbide thread former, an innovative approach to thread forming that combines a new geometry with more forming edges than comparable thread formers. The new thread former features a new coating and surface treatment for better tool life, higher productivity, and increased process reliability in large batch and high-volume production while achieving a lower cost per thread.
The exceptionally smooth yet hard coating improves surface quality, which, in turn, significantly reduces torque requirements. Intended for blind hole and through hole threads and thread depths up to 3.5 x DN in steel, it has also shown good results in machining cast iron and aluminum. The TC470 Supreme is offered in four variants: With or without lubrication grooves and/or internal coolant, as well as with radial or axial coolant outlet, optimized for long and short threads.
The TC470 thread former is available in dimension range of (metric) M3–M10 or (metric fine) M10 × 1–M16 × 1.5.
The Supreme designation indicates the highest level of technology and performance available. The Supreme lineup of products is one of three
The Perform tools are products that provide an economical solution with focused importance on price. The Advance tools are products which are efficiently balanced between price and performance.
Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.
The DA110 Perform drill from Walter can be used universally and cost-effectively for a wide range of materials. It delivers maximum accuracy thanks to its precision-ground surfaces and a tip geometry that has been engineered for optimum centering accuracy, while keeping production costs as a…
The M4258 modular helical milling cutter from Walter, the most recent addition to its M4000 family of high-performance helical milling cutters, brings cost efficiency and excellent process reliability to slot milling, and can be used for ramping, pocket milling, shoulder milling and circular…
The new versatile high-performance TC420 Supreme thread former from Walter features a new substrate and a new polygon geometry that provides better forming behavior, less friction and longer tool life. In addition, its polished surface yields a better surface finish than is achieved with thread…
Walter has introduced the new A60 and AG60 inserts for small to medium pitch threads. Just like the existing MX geometries (CF5 and GD8 for grooving and parting, RF5 for grooving and copy turning), the new MX geometries A60/AG60 provide long tool life, fine surface quality and process reliability.…
The new Cermet WEP10 indexable turning inserts from Walter deliver long tool life and high productivity. Their fine-grain titanium carbide substrate with Ni/Co binder produces a stable cutting edge. Combined with an extremely hard TiCN outer layer, this grade provides multiple advantages during…
Walter has introduced WSM01, a premier grade for demanding machining applications. Coupled with Walter’s new MS3 negative geometry, it produces burr-free results with high surface finish quality in the hardest materials.
The versatile new DC160 Advance solid-carbide drill from Walter delivers high productivity in a wide variety of materials and can be used universally in an extremely broad range of applications. The newly designed drill offers many advantages. The margins are located in an advanced forward position…
Walter has introduced the D4140 indexable insert drill, a tough and versatile new drill that delivers enhanced process reliability and extended tool life. The D4140 advantage stems from its design and construction, featuring a hardened and polished surface that offers exceptional resistance to…
Walter has introduced the Walter Prototyp ceramic milling cutters MC275/MC075. These two new tools deliver significantly increased productivity, cutting speeds and high metal-removal rates in the machining of nickel-based alloys.
Walter has introduced the DB130 Advance, its smallest solid-carbide microdrill with diameters from 0.004 to 0.06 in. (0.1 mm to 1.45 mm). With a point angle of 118° and cylindrical shank, the drill meets DIN 1899 standards.
PRODUCTS
