Tiger-tec Silver CVD-coating cutting tool material

Contact Details

Walter USA LLC

Address

N22 W23977 RidgeView Pkwy. W.

Waukesha

53188

WI

United States

Map It

Phone

800-945-5554

Fax

262-347-2501

View Website

Send Email

View Buyers Guide

September 01, 2010

Walter USA LLC reports that its Tiger-tec Silver CVD-coated cutting tool material offers extreme toughness for high thermal shock resistance and enhanced wear characteristics at high machining temperatures. According to the company, tool material properties can be adjusted in such a way as to improve cracking and breaking sensitivity, without having a negative impact on the high-temperature characteristics.

Additional Products from Walter USA LLC

MC377 Advance and MD377 Supreme

Solid Carbide Milling Cutters Tackle Range of Difficult Applications

The MC377 Advance, with protective chamfer, corner radii, and center cutting edge, can be used for chrome-nickel and steel materials, as well as titanium. The MD377 Supreme is a solid carbide milling cutter with a corner radius and central internal coolant engineered for titanium machining.

MC128 Advance and MD128 Supreme

Close-Pitch Solid Carbide Cutters for Maximum Productivity in Universal Finishing

The MC128 Advance boasts a wide diameter range of 1/4 -3/4 in. (2-25 mm) with a TiAIN coating for universal use. WJ30TF grade is available for ISO materials P, M, K, and S. The MC128 Advance is well suited for die and mold work as well as general metalworking. The MD128 Supreme provides 64% more…

W-1011-P/WL25 Copy Turn System

Copy Turn System Delivers Maximum Stability With Cost Efficiency

With this new tool, V or D-style inserts with just two cutting edges and lower stability (ISO VBMT, VCMT, DCMT) are replaced with triangular cutting inserts with three cutting edges and high stability. These three-edged inserts allow for a 50° undercut angle, ideal for profiling operations. Since…

MD838 & MD839 Supreme Circle Segment Cutters

Conical and Tangential Cost-Effective Finishing Circle Segment Cutters

The Walter MD838 Supreme (conical version) has an effective radius of 250-1000 mm, a corner radius of 0.5 - 4.0 mm and is available in diameters of 6-16 mm. Walter also offers a version of this tool with ConeFit exchangeable head. The MD839 Supreme (tangential version) has an effective radius of…

Cermet Turning Inserts

PVD Coated Cermet Grade WEP10C, With FP2 Geometry

High tool life is achieved thru WEP10C coated cermet grade with multilayer TiCN TiAlN PVD coating and fine cermet micro grain. The combination of edge preparation and grade also ensures dimensional stability over long periods of time, which boosts productivity in mass production

Tiger·tec Gold PVD Grade

The unique TiAlN-Al2O3 multilayer coating system makes the WSP45G both hard and tough, and thus extremely resistant to abrasive wear and high temperatures, with controlled residual stresses and less flank wear, all boosting tool life. A special mechanical post-treatment improves hairline crack…

Xtra·tec XT M5130 Shoulder Milling Cutter

Enhancements to the Xtra·tec XT M5130 milling cutter, including a new clearance angle of 7° have added to this universal tool's existing benefits of high performance, high surface quality, exceptional reliability and safety, and outstanding versatility. The M5130 handles a wide array of…

Accure·tec AC001 Vibration Damping Adaptor

Vibration-Free Milling When Using Long Tools

Accure·tec adaptors are ideally suited for the Walter Xtra·Tec® XT milling cutter range. This makes the system highly versatile. For example, for components with deep cavities in aircraft construction and aerospace industry in general, as well as the automotive, energy, die/mold, and general…

Xtra·tec XT M5012 Face Milling Cutter

M5012 is Used in Face Milling, Roughing, Rough Finishing

The Xtra·tec XT M5012 is highly cost-effective thanks to inserts being offered in a fully ground configuration for maximum precision, or fully sintered configuration for maximum cost efficiency. The bodies are offered in either ScrewFit or shell mount and with two pitches for different applications.

M5137 Xtra·tec XT Shoulder Milling Cutter

M5137 Xtra·tec XT Features Six Effective Approach Angles of Exactly 90°

The M5137 Xtra·tec® XT boasts reduced process costs thanks to its Tiger·tec® coating and six cutting edges per indexable insert. This translates to simple tool selection and low cutting material costs, and highly cost-effective operation due to low unit costs.

First page
Previous page
…
3
4
5
6
7
8
9
10
11
…
Next page
Last page