Walter has introduced the Walter Tiger·tec Silver WPP05S, an extremely wear resistant indexable insert grade that delivers high performance and maximum productivity in steel machining (ISO P), particularly in roughing forged components and long production runs. This is made possible, in part, by the insert's thicker Tiger·tec Silver coating with its optimized aluminum oxide microstructure, and its post-coating treatment that provides greater reliability, increased toughness and reduced downtime to chipping, especially in high-volume production.
Another key design enhancement to the WPP05S insert grade is a new substrate that delivers better resistance to plastic deformation. This is particularly important at higher cutting speeds required for increased productivity. In addition, a thicker cobalt-enriched zone yields greater toughness and process reliability.
Thanks to features like these, the new Walter Tiger·tec Silver WPP05S inserts, available in multiple geometries (MP3, MP5, RP5 and NRF), can reliably operate at high cutting speeds with greater metal removal rates. In addition, field tests have confirmed significantly increased tool life at high speeds.
Aluminum oxide, also known as corundum, is used in grinding wheels. The chemical formula is Al2O3. Aluminum oxide is the base for ceramics, which are used in cutting tools for high-speed machining with light chip removal. Aluminum oxide is widely used as coating material applied to carbide substrates by chemical vapor deposition. Coated carbide inserts with Al2O3 layers withstand high cutting speeds, as well as abrasive and crater wear.
Replaceable tool that clamps into a tool body, drill, mill or other cutter body designed to accommodate inserts. Most inserts are made of cemented carbide. Often they are coated with a hard material. Other insert materials are ceramic, cermet, polycrystalline cubic boron nitride and polycrystalline diamond. The insert is used until dull, then indexed, or turned, to expose a fresh cutting edge. When the entire insert is dull, it is usually discarded. Some inserts can be resharpened.
WBH20 is a grade well suited for ISO-H Group of material such as for hard turning applications. WBS10 is well suited for ISO-S materials, specifically nickel-based (such as Inconel), iron-based (such as Udimet) or cobalt-based (such as Hayens).
Available in diameter sizes ranging from 0.562-1.375 in. and 16-42 mm with 2, 3, 4 x Dc, the new drill delivers maximum process reliability with simple and efficient chip removal, two coolant channels and polished flutes. Superior protection against friction is provided by the D3120 hardened and…
The M2471 milling cutter, ideal for the aerospace and energy industries, boasts a high metal-removal rate even on low-performance machines thanks to its soft cutting geometries and positive cutting characteristics. It brings all the benefits of single-sided round inserts to double-sided round…
More cost-effective than comparable systems but just as easy on tools, the AB735 synchronous threading adaptor maximizes tool performance. In addition to the minimized wear, the modular design of the adaptor also contributes to cost-efficiency: Exchangeable front pieces for different thread sizes…
These new grades complement Walter's previously released WBH10C coated CBN and WBH10 and WBH20 CBN grade ideal for high temperature stability in hard metal turning. These inserts also have the option of chip breaker (TM-M2) for trouble shooting and wiper (MW2) for exceptional surface finish…
The MC025 Advance is available in diameters from 1/8-1 in. (1-25 mm). A single grade is offered for universal applications for steel, stainless steel, cast iron and materials with difficult cutting properties as well as its ability to lower inventory costs.The MD025 Supreme solid carbide milling…
Tangentially mounted grooving insert with a robust seating surface also ensures maximum stability. The insert and pocket design features an axial key stop for added stability against the side cutting (axial) forces. Precision cooling on the flank surface is offered as a standard feature for longer…
With the special flute geometry, the chips (swarf) are evacuated effectively. This means that hole depths of up to 12 x Dc can be easily achieved. Oil or emulsion can both be used as a coolant with these drills. For deeper holes beyond 8 x Dc, Walter has also introduced a corresponding line of…
The exceptionally smooth yet hard coating improves surface quality, which, in turn, significantly reduces torque requirements. Intended for blind hole and through hole threads and thread depths up to 3.5 x DN in steel, it has also shown good results in machining cast iron and aluminum. The TC470…
The mill is best suited to machining steel, stainless steel, cast iron, non-ferrous material and materials with difficult cutting properties. This wide range of uses results in lower tooling and administrative costs, as does the fact that its 90° approach angle dramatically decreases the need for…
PRODUCTS
