Product News

Limited space and minimal headroom are typical challenges when moving equipment. The MLS-Series is compact. It’s low-height design is ideal for minimal lift heights and to accommodate limited clearance above loads. It’s also versatile. The MLSS models provides good directional movement. Meanwhile the MLSR models feature 360-degree movement ideal for tight spaces.

The LFT-500 Series provides a cost-effective way to provide this type of enhanced process capability into your own facility. When functionally trimming, the particular parameter is continuously measured and compared with the set value. Once the set value is reached, the laser cut stops automatically. Resistance, voltage, current, frequency – almost all output signals can be adjusted to their target value via the LFT-500 Series tool, in conjunction with appropriate measuring equipment. Specifically built to target US based development groups who need tools for prototyping and pilot production, the platform provides a host of options including customized fixturing and test hardware.

Unlike traditional bridge CMMs, the AEROS main structure of support pillars and longitudinal guideways remains static, with only the gantry beam assembly moving during measurement. The open design is extremely adaptable, providing full access to the work area during loading and unloading of parts. It is particularly well suited to SMART factories with autonomous guided carts and manually operated wheeled or rail-type material handling systems.

An intuitive visual-based teaching environment, Epson RC+ Express offers fast, efficient programming of Epson SCARA robots for users with little-to-no programming experience, enabling manufacturers to quickly and easily develop robotic programs to overcome cost and time barriers associated with running industrial robots.

As a Pump-Per-Point system, the EVO-P features individual hydraulic pumps for each lifting point. This reduces distance from pump to cylinder, minimizing hose lengths and risk of leaks. The hydraulic pumps are two-stage, which are ideal for fast retraction and repetitive operations.

Using the method and software, manufacturers can fully optimize their thread turning operations. As part of the solution, CoroPlus Tool Path helps users develop optimized OptiThreading tool paths that specifically overcome the challenge of chip control. This is achieved by offering tool paths that deliver controlled, oscillating movements for interrupted cuts that go in and out of the cut on all passes except the last one.

DeepTri-Drill now offers wear-resistant AH9130 insert grade for its LOGT and TOHT inserts. AH9130 is the latest PVD technology specifically engineered for hole making applications. The grade consists of the latest PVD coating layer optimized for hole making applications combined with a dedicated carbide substrate and demonstrates superior wear resistance during deep drilling of steel, stainless steel, and cast iron, providing long and stable tool life.

One highlight of HALCON 21.11 is the addition of instance segmentation technology to the range of deep learning functions. This technology combines the benefits of semantic segmentation with those of object detection and enables the pixel-precise assignment of objects to different classes. It is particularly useful in applications where objects are very close together, touch each other, or overlap. This is the case, for example, when gripping randomly arranged objects from bins ("random bin picking") and when identifying and measuring naturally grown structures, such as organic material.

The thermal stability is exceptionally high due to an innovative machine design and a rigid 5‐axis configuration. Field tests have demonstrated an unusually high Cpk process capability. This is of particular importance when grinding short‐run custom tooling where accuracy and “first‐tool‐good” are critical. 

Operating at the optimum temperature range of 200° – 210°F as the original Tru Temp XL, TRU TEMP 2nd GEN makes it easy to use in-house and operator friendly. The chemistry is easy to manage and contains no EPA regulated metals, so rinse waters are generally sewerable by neutralizing the pH with a typical discharge range of pH 7-11. Additionally, reaching this pH range takes only 20% of the acid than other processes. Since TRU TEMP 2nd GEN requires no effluent treatment, the initial capital investment is only about half of other blackening finishes. 

The machine’s repeatability and top quality result from a pure atmosphere during printing, a consistently low-oxygen environment with fewer than 25 parts per million. This solution ensures excellent microstructures, very high material density and stable mechanical properties.

The gear drive transmission delivers full power at any speed, driving the cutting tools at nearly 100% of the available motor horsepower. Helical ground gears ensure positive, quite operation and make speed changes fast and easy. The wide speed range makes this the ideal drill for drilling large to small diameter holes fast and easy. 

The SCHUNK ROTA-M flex 2+2 clamping is done in a self-locking manner, and the clamping condition is signaled via indicating pins. The standard chuck sizes 260 to 1200 achieve jaw strokes from 9.5 mm to 17.8 mm and high clamping forces from 100 kN to 180 kN. As of size 800, users benefit from the weight-reduced design. The chuck face is equipped with grooves, and fixed stops allow the chuck to also be used as a vise. Moreover, the large sizes are designed for use on vertical lathes.

As with all of GF Machining Solutions’ LASER machines, the LASER P 400 series offers repeatable high performance, consistent accuracy and unvarying quality. Fully digitized texturing makes it easy to texture, mark, engrave and add functional surfaces to parts, molds and dies, even when dealing with complex 3D parts.

The Mikron MILL P 800 U S allows shops to machine components fully on a single machine and eliminate transfer-related part errors, along with stacked tolerances, for enhanced quality of finished parts. This scalable solution is perfectly suited for automation, with a smaller footprint compared to the Mikron MILL P 800 U. This makes it the ideal machine when using two machines or more. It has a maximum loading capability of 1,000 kg (2,204.62 lbs) and is suitable for heavy roughing to fine finishing.

GF Machining Solutions offers eight WPT 1+ models. Shops can start with a single magazine unit and then add one more as production needs change. The systems easily serve one or two machines within in a production cell thanks to the flexibility of the magazine capacities and its variants (Light, Heavy or a Rotary magazine), along with fully integrated pneumatic control for gripping devices and table chucks. Large doors allow for fast and easy loading and unloading to help shorten changeover cycle times for both low and high-volume applications.

The Microlution ML-5 is optimized for micro-scale holemaking and fine cutting, which it performs without creating any heat-affected zones. The machine’s compact, high- performance, ultrafast femto laser reduces cycle times and tooling costs to enable the production of precision parts in seconds.

The Success Packs, available in the tiered levels Bronze, Bronze +, Silver or Silver +, are designed to improve machine lifecycles, maximise ROI, and offer a direct line to GF Machining Solutions experts, enabling customers to achieve their desired business growth and maximize their productivity goals. Each Success Pack is customized to a specific customer profile and offers benefits such as faster access to service, 24-hour machining and support helplines, remote assistance, maintenance and servicing as well as targeted support and consultations from experts.

The M5004 octagon milling cutter combines efficiency and process reliability while also extending tool life, resulting in maximum productivity. Process reliability is enhanced thanks to the new tool's high stability. Lower tool costs and reduced time and labor result from its universal usability and no need for additional finishing operations.

The AgieCharmilles CUT P Pro series of wire-cutting EDM machines is designed for increased productivity, always available and ideal for every application with the largest technology database. The series includes the CUT P 350 Pro, the 550 Pro and the 800 Pro with robust designs and intuitive HMI as well as several automation options for lights- out operation.