Grinding Doc Series

Episode 64 of the Grinding Doc video series: When pushed to use a tri-grit wheel to cup-wheel grind tungsten carbide sawblade teeth, a shop turned to the Grinding Doc for some guidance. About the Grinding Doc Video Series: Thanks to his work as an independent grinding consultant and the author of the "Ask the Grinding Doc" column in Cutting Tool Engineering magazine, Dr.

Dr. Jeffrey Badger, the host of Cutting Tool Engineering's Grinding Doc Video Series, offers his take on the effectiveness of scrubber nozzles. nAbout the Grinding Doc Video Series: Thanks to his work as an independent grinding consultant and the author of the "Ask the Grinding Doc" column in Cutting Tool Engineering magazine, Dr.

The Grinding Doc offers insight to a shop worried that it's wasting abrasive on half-worn electroplated CBN wheels. About the Grinding Doc Video Series: Thanks to his work as an independent grinding consultant and the author of the "Ask the Grinding Doc" column in Cutting Tool Engineering magazine, Dr.

A machine shop turned to Dr. Jefffrey Badger—the Grinding Doc—seeking relief from the painfully long cycle times endured grinding cermets. The Grinding Doc explains what the shop should do to stop the pain.

Episode 60 of the Grinding Doc Video Series involves a shop that was cylindrical grinding a 50mm diameter part that proved to be out of spec despite in-process gauging that showed otherwise. About the Grinding Doc Video Series: Thanks to his work as an independent grinding consultant and the author of the "Ask the Grinding Doc" column in Cutting Tool Engineering magazine, Dr.

In the 59th episode of our Grinding Doc Video Series, Dr. Jeffrey Badger examines the new Cubitron II grit. The research cited in this episode is described in detail in the April 2014 edition of the Welding Journal.

Dr. Jeffrey Badger helps a shop that's having frequent issues with wheel loading when grinding hardened steel and stainless steel. About the Grinding Doc Video Series: Thanks to his work as an independent grinding consultant and the author of the "Ask the Grinding Doc" column in Cutting Tool Engineering magazine, Dr.

How close do you need to get the coolant nozzle to the grinding wheel? Dr. Jeffrey Badger offers some direction. About the Grinding Doc Video Series: Thanks to his work as an independent grinding consultant and the author of the "Ask the Grinding Doc" column in Cutting Tool Engineering magazine, Dr.

For one shop, increasing wheel speed when cup-wheel grinding usually reduces wheel wear, but sometimes it increases wear. The shop sought the advice of Dr. Jeffrey Badger in the 56th episode of our Grinding Doc Video Series.

A machinist wrote to Dr. Jeffrey Badger, author of the "Ask the Grinding Doc" column in Cutting Tool Engineering magazine, because the "old-timers" in the shop tell him he has to dress at the same wheel speed he uses to grind. The machinist wanted to know if that was true, and, if so, why?

A shop surface grinding 12" x 36" plates has to remove 1/8" of material on both sides, but the cycle time is a killer. To find a way to reduce the cycle time, the shop turned to Dr.

Dr. Jeffrey Badger, the host of Cutting Tool Engineering's Grinding Doc Video Series, offers a checklist for shops contemplating a switch from aluminum oxide to CBN wheels. About the Grinding Doc Video Series: Thanks to his work as an independent grinding consultant and the author of the "Ask the Grinding Doc" column in Cutting Tool Engineering magazine, Dr.