OML’s SinterGrip
OML's SinterGrip vise jaws demonstration.
Video Type
Product Demos
Linda Tooling: Operation documentation
David Holmes, the production manager at Linda Tool in Brooklyn, N.Y., recently pointed out the growing shop's emphasis on documentation. Here, Holmes offers a quick walk through of the company's DMG/Mori Seiki NL2000 lathe.
AgieCharmilles open house
Video report features the Form 20 sinker EDM machine, the Mikron HSM 400U LP 5-axis milling machine, and the Cut 300 Sp and Cut 200 mS wire EDM machines.
Laser hardening
Coherent Inc. demonstrates its HighLight D-Series direct-diode laser for heat treating.
Ultrasonic clean
Blue Wave Ultrasonics Sales Director Jeff Hancock demonstrates the ultrasonic cleaning process and explains the relationship between ultrasonic pressure waves and microscopic cavitation bubbles working in an aqueous solution. Blue Wave, which is located in Davenport, Iowa, provided the video as a video supplement to "Clean Sounds," a feature article published in the May 2013 issue of Cutting Tool Engineering magazine.
Kennametal quick-change
Kennametal shows a side-by-side comparison of its KM-Micro/Mini quick-change system versus a standard tool in this 2-minute demonstration, courtesy of Kennametal. While the KM-Micro/Mini tool change is complete in just half a minute, the standard tool requires 2 minutes to change, set up and gage the tool.
Tool quickie
In this 2-minute side-by-side comparison, Kennametal shows its KM-Micro/Mini tool being changed in just half a minute versus a standard tool requiring 2 minutes to change, set up and gage.
Driven by perfection
Video supplement on grinding machines provided by Junker.
Kennametal targets weakest link
Mike Ramsey, vice president of Global MTI Sales at Kennametal Inc., provides an overview of the company's new KM4X spindle connection system, which is said to triple the bending resistance compared to other systems.
Milling around with Kennametal
Scott Etling, manager of Global Product Management for Kennametal Inc.'s indexable milling products, discussed the company's Dodeka face mills and Rodeka copy mills for a CTEplus video report shot during IMTS 2012.
Helitronic Vision Long
Peter Kummerle, applicationsengineer with United Grinding Technologies, offers an on-camera overview of the Helitronic Vision Long, which is said to expand production capabilities on tools up to 700mm long without exceeding the working envelope of the classical Helitronic Vision.
Datron features next generation
Datron Dynamics Vice President Bob Murphy offers an overview of the M10 Pro, considered to be the "next generation" in the company's line of high-speed machining centers. The M10 Pro features linear scales on all axes driven by over-sized motors and drives that yield a +/- 5µm-position accuracy.