Product Demos

Videos • January 15, 2010

Small diameter, deep-hole drilling

Iscar designed drills for small-diameter, deep holes in automotive crankshafts, camshafts, connecting rods and more—all with minimum quantity lubrication.

Videos • October 15, 2009

Product focus: GrindSmart Nano6

As part of its occasional product focus video series, Cutting Tool Engineering Plus presents a closer look at the GrindSmart Nano6 from Rollomatic SA.

Videos • September 15, 2009

Driving diesel

Watch Sandvik Coromant Co.'s CoroMill 365 cutter mill an engine blockmade of compacted graphite iron in this online complement to our September CTE cover story.

Videos • August 15, 2009

On tap

Check out this brief video from Kennamental Inc. showing a side-by-side comparison of an HSS tap vs. a solid-carbide tap. The video accompanies CTE's August cover story on selecting the right tap for different workpiece materials. The split-screen video demonstrates the significant productivity advantage of the first solid carbide tap specifically engineered for tapping steels.

Videos • December 15, 2008

Double Duty

Data Flute CNC's Cliff Flynn, director of research and new product development, gets rough with the company's AFDH finishing tool in this 5-minute report. Flynn noted that the demonstration provided at IMTS 2008 was purposely aggressive on the finishing tool to underscore its finishing ability.

Videos • September 11, 2008

MicroEDM milling

As the Northeast U.S. representative for SARIX microEDM equipment, Leer Technologies Inc., Claverack, N.Y., spent the better part of EASTEC 2008 showing off the newest features of the SARIX-200 3D MicroEDM Milling machine. Cutting Tool Engineering spent a few minutes with Graham Ruck, sales/applications manager for Leer, at EASTEC this past spring to get a brief overview and demonstration of the microEDM milling machine.

Videos • July 15, 2008

High-speed wire act

Cutting Tool Engineering captured a brief demonstration of the FI 240 CC high-speed wire EDM machine at the GF AgieCharmille booth during the EASTEC show this spring.

Videos • June 15, 2008

Short Cycle Time

Daniel Dean, national sales manager for Tsugami USA, explains the features of the Tsugami newest Swiss-turn machine, the SS32, during a brief demonstration captured on video during EASTEC 2008 by Cutting Tool Engineering. The Swiss-turn machine offers 32mm capacity, as well as a unique modular tool zone, increased capability over previous gang type models, and a roomier tool zone for easier setup, Dean reports in this 4 minute and 38 second video report.

Videos • June 15, 2008

Seeing Double

Captured on video at EASTEC 2008, the Milltronics TT24 uses an integrated twin table machining center that Sales Engineer Craig Fostersays will keep CNC operators busy. Foster takes the CTE Plus video crew on a 3 minute and 15 second tour and demonstration of the TT24. The system features a fully integrated twin pallet machine with a unique design requiring no pallet removal, an inline spindle design—24 hp standard—and conversational programming with the Milltronics Centurion control.

Videos • June 15, 2008

A Cutting Moment

Travis Biggs, applications engineer, technical service, for Greenleaf Corp., offers the nitty gritty on the tools used in this 1 minute and 40 second video featuring a 5/8" ball nose tool followed by the company's Extreme Feed Mill 1" dia., 4-tooth cutting tool.

Videos • February 15, 2008

Tool Spray Redux

CTE Plus offers a look at minimum-quantity lubrication in action thanks to video provided by the Horkos Corp.

Videos • November 15, 2007

5-axis micromachining

The new 5-axis micromachining center from AtometricInc. generated some welcome excitement at shows like the recent Medical Design & Manufacturing event in Minneapolis, Minn. Learn more about the company and its new machine in this special MICROmanufacturing report.