Robotics Results Series

Videos • May 31, 2023

Robotics Results: 36% Increased Productivity

For the 16th episode of CTE's Robotics Results video series, Fusion | RoboJob-USA President Craig Zoberis filmed an automation setup that helped a shop increase productivity by 36% using a RoboJob-USA Mill-Assist Essential with a Haas Automation Inc. VF-2SS.

Videos • April 1, 2023

Robotics Results: More machines, more robots, more profit

For his Robotics Results column in the April 2023 issue of Cutting Tool Engineering, Fusion | RoboJob-USA President Craig Zoberis writes about the downside of automating two CNC machines with one robot system. The 15th episode in CTE's Robotics Results video series shows an automation setup with a robot system at each CNC machine.

Videos • February 3, 2023

Robotics Results: The Acceptance Cycle

The 14th episode in CTE's Robotics Results video series shows CNC machine-tending robots in action. Supplied by Fusion | RoboJob-USA President Craig Zoberis, the video is a supplement to his latest Robotics Results column, "The Acceptance Cycle," which appears in the February 2023 issue of CTE magazine.

Videos • October 1, 2022

Robotics Results: Evaluating options for automation

Fusion | RoboJob-USA's Mill-Assist Essential on a 2021 Haas Automation VF-4SS.

Videos • August 1, 2022

Robotics Results: Beyond the obvious

Robotics Results: Beyond the obvious

Videos • May 26, 2022

Robotics Results: 13 hours uninterrupted production

Watch a time-lapse video of the latest automation solution presented as part of Cutting Tool Engineering's Robotics Results column authored by Craig Zoberis, founder and president of Fusion | Robo-Job-USA in Burr Ridge, Illinois.n

Videos • January 24, 2022

Robotics Results: Increasing productivity 65%

The Robotics Results column in the February 2022 issue of Cutting Tool Engineering magazine demonstrates how ROI is guaranteed with robotic automation, and enables industry professionals to visualize their ROI through off-the-clock operations.

Videos • July 23, 2021

Robotics Results – RoboJob NV Turn-Assist 200i on a Haas Automation ST-20SS CNC machine

This video supplement to the Robotics Results column in the August 2021 issue of Cutting Tool Engineering magazine demonstrates how one shop increased productivity 43% by introducing a RoboJob NV Turn-Assist 200i on a Haas Automation ST-20SS CNC machine. n

Videos • May 26, 2021

Automation boosts shop’s productivity 41%

The sixth episode of this Cobotics Corner video series demonstrates the use of a Universal Robots UR5e arm with a Schunk three-finger gripper loading and unloading a Haas Automation SL-20 CNC machine. This automation solution reportedly helped increase productivity by 41%, according to Fusion OEM.

Videos • March 29, 2021

Cobotics Corner Case Study: Increasing productivity 32%

Watch a Cobotics Corner demonstration that helped increase productivity by 32% using a Universal Robots UR5e arm with a Robotiq dual parallel servogripper on a 2018 Haas Automation VF-2SS CNC machine, according to Fusion OEM.

Videos • January 28, 2021

CNC machine tending with Haas VF-2SS & UR10e

Watch a Cobotics Corner demonstration that helped increase productivity by 43% using a Universal Robots UR10e arm with a Robotiq dual parallel servogripper on a 2018 Haas VF-2SS CNC machine, according to Fusion OEM.

Videos • July 23, 2020

Robotic CNC Machine Tending

Cutting Tool Engineering debuts a new video series, Cobotics Corner. Watch a brief demonstration of a robotic CNC machine tending operation on a Haas VF2SS with a Universal Robots UR5e and a Robotiq Dual Hand-E.