Videos

Daniel Dean, national sales manager for Tsugami USA, explains the features of the Tsugami newest Swiss-turn machine, the SS32, during a brief demonstration captured on video during EASTEC 2008 by Cutting Tool Engineering.

Some coatings, such as TiAlN, enable dry machining when drill ductile cast iron, but coolant is desirable to help evacuate the material's small, curled chips. Flood coolant can be appropriate for holes less than 1.5 to 2 diameters deep, according to Bob Jennings, product manager for Ingersoll Cutting Tools, Rockford, Ill.

Travis Biggs, applications engineer, technical service, for Greenleaf Corp., offers the nitty gritty on the tools used in this 1 minute and 40 second video featuring a 5/8" ball nose tool followed by the company's Extreme Feed Mill 1" dia., 4-tooth cutting tool.

Acoustic emission (AE) sensors detect ultrasonic sound waves emitted when the grinding wheel contacts a part or the dressing wheel and send that information to a process control unit. Monitoring the sound waves and comparing them with reference values allows operators to control the grinding and dressing processes.

With so much of the news focused on manufacturing lost to China, India and elsewhere, Illinois ProTurn is growing, doubling in size, says Dan Lamz, president of the McHenry, Ill., shop. The majority of the shop's work is in the plastic injection mold industry, and Lamz says the company's forté is hard turning.

CTE Plus offers a look at minimum-quantity lubrication in action thanks to video provided by the Horkos Corp.

Watch how some companies are fighting the negative image of manufacturing with a clean, high-tech message aimed at youth.

Western Oklahoma job shop Kos Machine LLC makes it a point to help out local farmers. Follow along as Kos repairs an old Case tractor in this video slide show.

This brief video report features United Titanium employees who demonstrate the production of proprietary threaded titanium fasteners.

Greenleaf Corp. introduced its WG-300 ceramic composite tool material about 25 years ago. The ceramic matrix is reinforced with silicon-carbide "whiskers" that boost toughness. Initially applied in the relatively constant cutting conditions of turning operations, the composite tools provided a significant increase in productivity when roughing aerospace alloys. Shops are now using WG-300 tools in hard milling operations.

Interrupted turning is common in aero-engine machining, said Sean Holt, aerospace specialist for Sandvik Coromant Co., Fair Lawn, N.J. There, a complete, finished component is machined out of a single, large block of material (most commonly Inconel 718) in several process stages that involve accurately removing a vast amount of material to meet strict parameters for the finished part's dimensions and characteristics.

Though ITI Tooling Co. Inc. introduced the Varia Rapid-Change Tooling System some four years ago, the company's product manager—Lee Hebenstreit—says word of this technology has not yet spread throughout the markets it could help. That's why the company produced a 22-second video showing the Varia tool changing system in action.