Videos

Mitee-Bite Products introduces the Pitbull® Wear Plate. This shim provides a hard barrier between Pitbull® Clamp and fixture, preventing distortion of back wall when using aluminum or mild steel fixtures.

Designed for CNC machining, Heule's BSF (Back Spot Facer) tool is an economical backwards spotfacing and counterboring tool that allows machining of large spotfaces and counterbores up to 2.3xd without turning the work piece over.

Check out the newly released Hurrimill AT4 end mill. This all terrain 4 flute end mill is perfect for slotting and profiling, ramping, plunging, high speed milling, and roughing and finishing.

The video will show how Abanaki's Oil Boss oil skimmer provides cost savings by removing unwanted tramp oil prolonging the life of the coolant. The patent-pending Oil Boss is designed for CNC machines offering passive tramp oil removal.

Beckett Packaging manufactures and stocks a full range of Round Telescopic Plastic Tubes. Durable, reusable and resistant to moisture, this packaging will allow for storage of various tool lengths.

The CERATIZIT WTX-HFDS solid carbide drill with Dragonskin coating achieves new levels of quality, hole tolerance, and positioning accuracy, with low burr formation while entering and exiting the hole. The core stability of the drill is retained with optimum cooling via four internal spiral coolant holes making the drilling process safe and effective.

This video supplement to the Robotics Results column in the October 2021 issue of Cutting Tool Engineering magazine features the RoboJob-USA Turn Assist Essential i model with a Schunk three-finger gripper on a Haas Automation St-30 CNC machine.

Sandvik Coromant offers a deep hole drilling strategy using its CoroDrill 861-GP and 861-GM drills in this brief video supplement to "A Happy Medium," a feature article in the October 2021 issue of Cutting Tool Engineering that delves into effectively drilling austempered ductile iron.

For one high-mix, low-volume application, Methods Machine Tools reported that it worked with diamond tool manufacturer CDP Diamond Products Inc. in Livonia, Michigan, to design, create, test and integrate a custom turnkey automation cell composed of a Fanuc CRX cobot (video demo), two Fanuc C600iA Robocuts and an infeed/outfeed system.

YG-1 USA's new FM10 PNMU face milling platform, which is featured in this brief video demonstration, combines multi-corner face milling performance with high-feed capabilities.

The MonsterMill FRP CR has patent-pending geometry that delivers compression across the entire cutting length resulting in the prevention of projecting fibers, multiple use option, and economical programming of the machine.

Overlapping inserts allow Ingersoll's NuMaxILock to produce smooth chip formation at high-feed rates while high axial shear provides smooth chip formation. Tangentially mounted inserts with dovetailed seating provide greater cutter reliability and insert stability.