Videos

KOMET Service North America, a partnership between KOMET of America and a variety of independent companies to service the KOMET brand of tools, welcomed Grinding Technology LLC to its list of partners at a special ceremony held during IMTS 2014.

Heule Tools Corp., which celebrated its 25th anniversary at IMTS 2014, introduced two new products at the semi-annual trade show event. Gary Brown, president of Heule Tools Corp., North America, describes a new drilling line and the company's new counterbore tool said to be capable of creating back spot faces of more than 2x diameter.

United Grinding unveils new machine at IMTS 2014.

Makino offers overview of its a81nx machine at IMTS 2014.

Quick overview of the Helitronic Vision 400 at the United Grinding booth during IMTS 2014.

Rollomatic USA debuts its new 528XF grinding machine to grind long, thin drills at its booth during IMTS 2014.

Makino Inc. featured its a61nx-5E horizontal machining center at IMTS 2014. Designed with an innovative pallet-change system, the a61nx-5E provides enhanced rigidity through a three-point bed casting and tiered column structure. It has X-, Y- and Z-axis travels of 730 mm (28.7 inches), 730 mm and 680 mm (26.8 inches), respectively.

Dr. Jeffrey Badger, author of the "Ask the Grinding Doc" column in Cutting Tool Engineering magazine and host of CTE's Grinding Doc Video Series, previews his 3-day High Intensity Grinding Course.

ANCA USA introduced its tubular linear motor technology in three machines at IMTS 2014. The line of FX linear tool and cutter grinders incorporate the new LinX tubular linear motor technology developed by ANCA Motion. The LinX motor is said to be an efficient, high-performance cylindrical motion system that provides improved performance at alower cost when compared to conventional linear and rotary motors.

Röhm Products of America's F-senso pull-in force measurement device enables you to check the pull-in force of your tool clamping system. The regular monitoring of the pull-in force makes it possible to detect changes in the clamping strength before they have an effect on the quality of processing.

A machinist wrote to Dr. Jeffrey Badger, author of the "Ask the Grinding Doc" column in Cutting Tool Engineering magazine, because the "old-timers" in the shop tell him he has to dress at the same wheel speed he uses to grind. The machinist wanted to know if that was true, and, if so, why?

Tool-Flo Manufacturing Inc. featured coolant-fed clamps designed to eliminate the need to change or modify the toolholder at the company's booth during IMTS 2014. The holder connects to an existing coolant pump on a manual lathe. End users replace the current top clamp with the coolant-fed clamp to provide a direct coolant feed to the cutting edge.