Videos

Do you have the right grit for a smooth finish? Dr. Jeffrey Badger, the host of Cutting Tool Engineering magazine's Grinding Doc Video Series, takes a look at a common problem shops have with getting the surface finish that they want in the 3rd episode of the video series.

Part of CTE's October cover story, this video sidebar follows tool grinder Jim Clark as he employs the ANCA CNC toolgrinding machine at Hamill Manufacturing to create custom geometry onan endmill for a military application.

As part of its occasional product focus video series, Cutting Tool Engineering Plus presents a closer look at the GrindSmart Nano6 from Rollomatic SA.

Produced as an online complement to the October 2009 Productive Times article in Cutting Tool Engineering, this brief video looks at Myles Tool's decision to use a wheel truing machine from Rush Machinery.

Dr. Jeffrey Badger, the host of Cutting Tool Engineering magazine's Grinding Doc Video Series, fields a question from a shop that hasn't had any luck with ceramic abrasive. Watch the 2nd episode of the video series now.

Watch Sandvik Coromant Co.'s CoroMill 365 cutter mill an engine blockmade of compacted graphite iron in this online complement to our September CTE cover story.

The debut episode of Cutting Tool Engineering magazine's Grinding Doc Video Series fields a question from a shop wondering about the relationship between coolant velocity versus the flowrate. Dr. Jeffrey Badger, the host of the video series, takes a look at the coolant issue.

Check out this brief video from Kennamental Inc. showing a side-by-side comparison of an HSS tap vs. a solid-carbide tap. The video accompanies CTE's August cover story on selecting the right tap for different workpiece materials. The split-screen video demonstrates the significant productivity advantage of the first solid carbide tap specifically engineered for tapping steels.

CTE's July cover story examines drills with interchangeable carbidetips, while the accompanying video shows how interchangeable-tip drills permit quick inspection and replacement.

U.S. moldmaking has been hit hard by overseas competition. Makers of molds for glass products face added pressure because alternate materials—mostly plastics—are replacing many glass applications. Quality Mould Inc., one of a handful of independent glass mold shops remaining in the U.S., machines molds for pressed-glass products.

Not all landing gear tests require facilities the size of small towns or the ability to land the 787 Dreamliner, which is discussed in the March 2009 cover story of Cutting Tool Engineering magazine.

Presented here is avideo of a SideLok long-edge milling cutter from Valenite LLC, Madison Heights, Mich.,machining Ti6Al4V at a cutting speed of 150 sfm, a feed rate of 4.5 ipm, a WOCof 0.375" and a DOC of 1.5" on a 30-hp HaasV65 CNC mill.