GEN3SYS XT Pro Material-specific Geometries and Coating Combinations Deliver Premium Results

GEN3SYS XT Pro Material-specific Geometries and Coating Combinations Deliver Premium Results

GEN3SYS XT Pro high penetration drills feature inserts designed specifically for steels (P), cast irons (K), and non-ferrous materials (N).

April 9, 2019
Drilling & Boring Machining

GEN3SYS XT Pro high penetration drills feature inserts designed specifically for steels (P), cast irons (K), and non-ferrous materials (N). The material-specific inserts for steel and cast iron have AM400 series coatings providing increased wear resistance and tool life. Inserts for non-ferrous materials are coated with titanium nitride. Diameters range from 11 mm (0.4331 inches) to 35 mm (1.378 inches), and are available in 0.1 mm (0.004 inch) increments. The flute design improves chip evacuation and the coolant configuration directs additional coolant to the cutting zone. GEN3SYS XT Pro holders are offered in 3xD, 5xD, 7xD, and 10xD.

For more information visit http://bit.ly/2FW0him

n

Glossary terms in this article

  • wear resistance
    Ability of the tool to withstand stresses that cause it to wear during cutting; an attribute linked to alloy composition, base material, thermal conditions, type of tooling and ope…
  • cast irons
    Cast ferrous alloys containing carbon in excess of solubility in austenite that exists in the alloy at the eutectic temperature. Cast irons include gray cast iron, white cast iron…

Related