Cutting raw materials into usable workpieces

Raw materials for machining and fabrication arrive in various sizes and shapes. Rarely do raw material dimensions conform to necessary workpiece dimensions, which means that most jobs require some type of cutting activity to produce a workpiece.

Sawing is the most common way to cut a workpiece from a larger portion of material, and the bandsaw is probably the most popular saw at machine shops. Bandsaws come in two varieties: vertical and horizontal. Vertical saws orient the blade perpendicular to the floor whereas horizontal saws have a blade parallel to the floor. Horizontal saws are best suited for bar stock, tubing and structural materials, like angle iron. Vertical saws are better suited for fine work, such as trimming or shaping features in a workpiece, before finishing on another machine tool. Vertical saws are sometimes fitted with CNC tables and used to cut bigger plates into smaller workpieces known as plate saws.

Cold Cuts

Although they are versatile and productive, bandsaws don’t always provide the desired accuracy. When that is important, especially with miter cuts, cold saws may be the better choice for cutoff operations. Cold saws use circular HSS or carbide-tipped blades that resemble the circular saw blades found at a wood shop. Being more rigid and less susceptible to walking in the cut, solid blades enhance accuracy.

Abrasive waterjet cutting has few limitations, making it the most universal method for cutting flat stock. Image courtesy of C. Tate.

Cutting with a cold saw blade is similar to milling, so well-built cold saws have a firm way system, much like knee mills, to ensure that blades are supported sufficiently. The rigid blades and sturdy construction make cold saws more accurate than bandsaws. However, depending on the application, a cold saw might be less productive than a high-quality bandsaw.

Most flat stock is not cut on a saw. Flat materials provide distinct sawing challenges, particularly when materials are thin. Numerous other ways exist to cut flat stock, such as sheet and plate.

Cutting flat materials into rectilinear shapes is best done with a shear. Shearing is performed by firmly holding material against a stationary blade while another blade moves against the material, ultimately cutting, or shearing, it. Shearing metal is no different from using scissors to cut fabric. Shears are fast, accurate and inexpensive to operate. Unfortunately, cutting complex shapes is all but impossible with shears.

Thickness also can be challenging. Although shears that can cut 1″-thick material are available, few shops can handle anything over 3⁄8″. Shears capable of cutting material over ½” can be expensive, and sheared edge deformation increases with material thickness, which reduces accuracy. So shearing may not be the best choice for thick plates.