Skip to content
From Cutting Tool Engineering

Observant eyes, ears of a retired dad

When running a machine shop, I've discovered that being on the premises day after day can gradually desensitize a manager to the point that it's hard to notice problems or issues, even when they're right in front of you.

September 15, 2011By Keith Jennings

When running a machine shop, I’ve discovered that being on the premises day after day can gradually desensitize a manager to the point that it’s hard to notice problems or issues, even when they’re right in front of you. Just when I think the shop is running smoothly and it’s OK to relax, there’s likely something bubbling that will ruin the perfect image I’m envisioning at my desk. This isn’t necessarily an indication of failure, but proof an owner or manager can’t see or hear everything, and that being in the middle of the action can create blinders.

One of my dad’s most memorable stories from his shop past is an incident about 30 years ago when his own retired dad toured the shop. My dad was confident that his efforts as the company manager were going well and Grandpa would be impressed. While touring the shop, the old man asked, “When are you going to fix that air leak?” My dad listened for a few seconds but didn’t hear anything, finally responding with the astute, “What air leak?” My dad had to be convinced there really was an air leak. Grandpa may have been retired, but he still had the keen eyes and ears of an experienced shop veteran.

That incident left a memorable impression and lesson, which has been passed on to me. The air leak was fixed the next day and solved a problem that happened so gradually, the regular crew never noticed.

Fast forward to 2011. My dad is now the one who’s retired and no less observant than was his dad 30 years earlier. Throughout the year, our shop has undertaken an assortment of improvement projects, from the acquisition of new equipment to the addition of office space. At my request, my dad has helped plan, execute and oversee some of the projects. He’s usually anxious to be involved in a good project as long as it doesn’t disrupt his lunch break with the other retired guys at the watering hole. So, I still appreciate him handling a few things, knowing they’ll get done expeditiously.

Finish task to continue reading

Review the print ads from this magazine to continue

This quick advertiser review unlocks the rest of the article and keeps the full-screen reader focused on the ads instead of the page chrome.

Advertisers included in this article experience

Print placements connected to this article

Sumicarbide

SPECIAL

PROMO Free DNX cutter with the purchase of inserts (see website for details) Our range of inserts, cutters and drills features the advanced, high performance characteristics and longer tool life for roughing and finishing gray and ductile Visit us at imX Booth #1475 IS #84.

SPECIAL PROMO Free DNX cutter with the purchase of inserts (see website for details) Our range of inserts, cutters and drills features the advanced, high performance characteristics and longer tool life for roughing and finishing gray and ductile cast iron applications. Call or go to www.sumicarbide.com for more information. Go to www.sumicarbide.com/castiron or scan the QR Code with your phone >> (800) 950-5202 www.sumicarbide.com Visit us at imX Booth #1475 IS #84

Print page 13

Visit Sumicarbide View this placement in the issue record

Cutting Tool Engineering

Get noticed by manufacturing FOR 2012:

NEW professionals with the power to purchase. Place Job Shop your ad in CUTTING TOOL ENGINEERING’s Directory! 2012 BUYERS GUIDE. In print and online. Place a display ad in the 2012 Buyers Guide and receive the following at no charge: Unlimited product listings (non-advertisers are charged for listings over 10). Preferential placement in online listings

NEW Get noticed by manufacturing FOR 2012: professionals with the power to purchase. Place Job Shop your ad in CUTTING TOOL ENGINEERING’s Directory! 2012 BUYERS GUIDE. In print and online. Place a display ad in the 2012 Buyers Guide and receive the following at no charge: Unlimited product listings (non-advertisers are charged for listings over 10).

Print page 25

Visit Cutting Tool Engineering View this placement in the issue record

When a shop experiences such a high level of activity, it can be distracting for an owner or manager to personally oversee every special project. You can become unknowingly desensitized to other issues, so lately my dad has been making observations similar to Grandpa’s air leak, for better or worse.

One evening at home, his observations evolved into a tiring discussion. He identified a list of items that needed attention, much of which I responded with my own profound, “Huh?” To an outsider, the discussion probably sounded like a negative assessment, but understanding his passion for a great shop, I viewed his rant as constructive criticism and wasn’t offended. A few of his items included operators who were leaving too much trash and personal items laying around their work areas, too many employees leaving work areas early for breaks and lunch, and washing hands and cleaning up on company time.

Thinking about it later, I decided to take his advice to heart and apply his “air-leak” lesson to my crew. It also became apparent to me how important it is for an owner or manager to be able to accept constructive criticism. Hopefully, your staff is professional enough to inform you when something is leaking, broken, rejected or missing and, hopefully, you are professional enough to handle hearing it. Many aren’t. Don’t underestimate the value of another set of eyes and ears in your shop. Sometimes they see and hear problems you miss.

MFGAxis MFGAxis Discussion Be part of the shop-floor conversation Like, save, or comment on this CTE story.
Be the first to engage.

MFGAxis Discussion

Be the first to engage.
Scroll for the next article