Hardinge Inc., a leading international provider of advanced metalcutting solutions, recently introduced Meghan Tranchina as the company's new West Coast Regional Sales Manager for the Turning & Milling Group. Tranchina began her career with HS&S Machine Tools and Metrology, and most recently held the position of sales engineer covering Northern California and Nevada for Methods Machine Tools.
Tranchina will report to Brooke Sykes, director of sales & service Turning/Milling Group. Her territory will include northern California, Nevada, Oregon, Washington, Montana, Idaho, Nebraska, Wyoming, Utah, Colorado and western Canada.
Said Sykes: "We are very pleased to have Meghan directing our sales efforts on the West Coast. Her years of sales experience as well as her technical knowledge will help us to be successful in this very important market. We believe in our distributors and feel that this addition to our regional sales team will help to continue the support of our distributors and customers. ”
Related Glossary Terms
- gang cutting ( milling)
gang cutting ( milling)
Machining with several cutters mounted on a single arbor, generally for simultaneous cutting.
- metalcutting ( material cutting)
metalcutting ( material cutting)
Any machining process used to part metal or other material or give a workpiece a new configuration. Conventionally applies to machining operations in which a cutting tool mechanically removes material in the form of chips; applies to any process in which metal or material is removed to create new shapes. See metalforming.
- metrology
metrology
Science of measurement; the principles on which precision machining, quality control and inspection are based. See precision machining, measurement.
- milling
milling
Machining operation in which metal or other material is removed by applying power to a rotating cutter. In vertical milling, the cutting tool is mounted vertically on the spindle. In horizontal milling, the cutting tool is mounted horizontally, either directly on the spindle or on an arbor. Horizontal milling is further broken down into conventional milling, where the cutter rotates opposite the direction of feed, or “up” into the workpiece; and climb milling, where the cutter rotates in the direction of feed, or “down” into the workpiece. Milling operations include plane or surface milling, endmilling, facemilling, angle milling, form milling and profiling.
- turning
turning
Workpiece is held in a chuck, mounted on a face plate or secured between centers and rotated while a cutting tool, normally a single-point tool, is fed into it along its periphery or across its end or face. Takes the form of straight turning (cutting along the periphery of the workpiece); taper turning (creating a taper); step turning (turning different-size diameters on the same work); chamfering (beveling an edge or shoulder); facing (cutting on an end); turning threads (usually external but can be internal); roughing (high-volume metal removal); and finishing (final light cuts). Performed on lathes, turning centers, chucking machines, automatic screw machines and similar machines.
INDUSTRY NEWS
