CNC Machining (General)

Products • January 18, 2023

Tool Caddy

The horizontal arrangement of the tool pockets greatly improves machinist safety. Traditional tool racks and carts keep tools in a vertical position with the cutter tip pointing up. This creates a risk of injury for operators when they need to reach over sharp edges to access other tools in the middle or back of the cart. The Tool Caddy design makes it easy and convenient for the operator to grab each toolholder without any risk of cuts, and it uses only about 4 square feet of floor space.

Products • January 14, 2023

CenterMaster

With CenterMaster, the user simply clamps a radio dial gauge into the workspace and sets it to the quill. The gauge and machine wirelessly communicate, automatically adjusting the holder along the X axis. The system then guides the operator through adjusting the Y axis via the machine's touchscreen display.

Products • January 12, 2023

DVF 4000

The DVF 4000 comes standard with a 15,000 r/min direct coupled spindle, powered by a 24.8 hp (18.5 kW) motor that generates 87.1 ft-lbs (118 Nm) of torque. A FANUC 31i-B5 Plus control makes full 5-axis simultaneous control possible, giving complete contouring capabilities. It features a 400 mm diameter built-in rotary table with a zero-backlash roller gear cam design for superior rigidity and speed.

Products • January 10, 2023

FH5000 Horizontal Machining Centers

Toyoda's FH5000S HMCs with 60-tool ATC capacity are designed for speed and production reliability, featuring a 15,000 RPM, 50 HP (37 kW), 303 Nm (223 ft-lbs.) high acceleration spindle. The 40-taper spindle is designed with four ceramic bearings at the front of the spindle for increased rigidity and reduced vibration. Its patented hydraulic preload system brings the spindle up to 15,000 RPM less than one second without spindle warm-up, ideal for aluminum processing. The larger machines in the FH5000 series are equipped with a 50-taper spindle, 45 tools, and a longer X axis travel.

Products • December 13, 2022

ZA6 Robot

The ZA6 is the only industrial robot to use Python as its programming language. Python is popular, easy to learn, powerful, and because it's commonplace, it makes it incredibly easy to integrate ZA6 with other Python-driven systems. With over 200,000 Python libraries available, most of the work required to connect the ZA6 to the outside world has already been done.

Products • December 13, 2022

DTect-IT

DTect-IT is a versatile CNC sensor analysis system that takes in data from a multitude of high-precision sensors. The surface roughness measurement application uses the Blum-Novotest TC64 RG Digilog Probe as the sensor input in DTect-IT to analyze the surface of a part.

Products • November 22, 2022

TetraMiniCut Left-Handed Inserts

The series is now introducing TCS18 and TCL18 inserts designed for left-hand cuts, expanding the product lines that, up to now, has offered right-hand inserts only. Grooving and parting tools commonly used in most of the operations performed in conventional CNC lathes and Swiss machines are right-handed. As highly advanced multitasking machines with multiple spindles and turrets are gaining popularity to maximize productivity, the needs for left-hand tools are increasing as well, which enable simultaneous machining on the right and left-hand spindles of such machines.

Products • November 9, 2022

Explorer CNC Milling Machine

This small machine weighs 42 pounds and ships in a Pelican case for ease of storage, transportation and portability. It can run off a regular electrical plug, battery or generator — for use at home, in the office, in the classroom, garage or workshop and even on the road (or camping on a mountaintop).

Products • November 3, 2022

Cast Iron Tooling Columns

Column construction uses stress relieved, class 40 cast iron, with the base and sides milled flat, perpendicular, and parallel within .001"/ft. providing an accurate foundation on which to setup workholding devices or quick-change systems. What does this spec translate to for customer use? Other features include a center locating bore, inch, and metric hole patterns, M12 lifting holes for secure hoist ring attachment.

Products • October 27, 2022

TD 110 Tool Breakage Detector

The TD 110 tool breakage sensor can be placed in the work envelope so that it is fast and easy to reach during the tool change. The inductive sensor can detect tools as they pass by while they are spinning at their operational speed. Thanks to its rapid scanning technology, even very small tools made of HSS steel and carbide are detected.

Products • October 19, 2022

Ultra Probing System

The system comes with a choice of two different touch probes. The UWP45 is a 45mm diameter touch probe ideal for multi-axis machining centers and compatible with the Marposs T25, TT25, TT30 and T25P probe ranges. The UWP60 is a 60mm diameter touch probe that is suited for use on large scale workstations and vertical lathes. It can be configured for use with Marposs T25, TT25 and T25P probes with extensions up to one meter in length.

Products • October 5, 2022

GENOS M560V-5AX Machining Center

The GENOS M560V-5AX is built with a double-column machine design, affording it maximum structural integrity. The machine offers an impressive working envelope with a 500mm table and wide axis travels (X: 1,050 mm, Y: 560 mm, Z: 460 mm), while still maintaining a compact footprint of 2,515 mm x 3,750 mm. Further optimizing the machine's design, the GENOS M560V-5AX includes a trunnion table positioned parallel to the front of the machine which allows for easier access to the table and good visibility during machining.