Fabrication & Cutting

The compact system footprint is 2.1m x 4.8m, and all components are on one skid for easier transport and a faster, streamlined installation. Straightforward maintenance with dual chamber doors, easy-to-remove deposition shields, and quick access to all sources for target changes. The most recent version of our easy-to-use VaporTech coating system software interface.

Available with or without a keyway, Stafford Weldable Flange Collars are ideal for attaching gears, pulleys, sprockets, and other devices. They come in sizes ranging from 3/8" I.D. to 3" I.D. and specials can be made in other sizes and from weldable 316 stainless steel. Other custom modifica-tions can include threaded bores, slots, grooves, and more.

FABTECH, a metal forming, fabricating, welding, and finishing event will occur in Orlando from October 15-17. This year's special events, which are free to all attendees unless noted, will feature a dynamic lineup of industry leaders, innovators, and visionaries.

Filter manufacturer Vomat from Treuen, Germany, will be showing a cross-section of high-performance filtration technology at IMTS North building, level 3, booth 237475.

Norton NORaX N889 belts feature an engineered, high-performance micron-grade aluminum oxide grain structured in a fine 3D pyramid pattern which is especially well suited for lower pressure (0-8 PSI) applications where belt flexibility is needed. The engineered abrasive slowly erodes during grinding, exposing new, sharp abrasive grains resulting in 2-5X longer belt life than conventional polishing belts, as well as higher quality finishes, faster cutting rates and an ability to reduce finishing/ polishing steps.

Complete with API's iScan3D, iScanMagic and iScanLite represent the most complete scanning portfolio available today. They continue API's mission to offer state-of-the-art scanning solutions for every application need and budget. The entire iScan series is available for demonstration and purchase immediately.

At the Christchurch Engine Centre in New Zealand, surfacing solutions expert Rösler UK has worked with Pratt & Whitney to improve their shot blasting process.

The UltraTEC ultrasonic A25 creates a formation and dissolution/implosion of bubbles in water that release an intense energy during implosion. This is created by an ultra-high oscillation of 20kHz (20,000 oscillations per second) with an oscillation width of +/-80-120microns, which far exceeds the amplitude of ultrasonic cleaning, cutting and welding technologies.

Aluma-Bright Foam can be used at 65°F to 180°F at concentrations of 1% to 10% by volume with water. Foam, immerse, wipe, scrub, or spray on metal then rinse thoroughly with water. Contact time will vary with soil loading and application. For optimum results when working with large surfaces, clean from the bottom-to-top to minimize streaking effects, then water rinse from the top of the part and work towards the bottom. Using a dedicated slow flood rinse motion with ambient to cool clean water, an operator can determine that soils and any acidic residual chemical residue are neutralized and rinsed away when a smooth water break free surface film is observed during rinsing.