Operation / Process

Inspection & Quality

Optional: narrow results to one content type.
Select one or more.
Select one or more.
Select one or more.
Reset
Products December 2, 2020
HF-5 Hose Band Marking Fixture
The clever design features 5 rows of clamping with 12 "fingers" on each row that flex and conform to part dimensional variations as well. One toggle lever clamps all five bands and draws them down securely for the dot peen marking operation. Custom configurations and pneumatic powered designs are also available.
Products December 2, 2020
5074A Digital Charge Amplifier
The 5074B also comes with two features that deliver major operational improvements. The new amplifier is ready to operate within around six seconds, as compared to the previous time of 30 seconds for each startup procedure – so users save valuable time. This improvement has a direct impact on plant availability, especially for modular plants with swappable hot-plug modules. Another innovation: the two energy paths in the M8 connectors are now separated so that additional standard devices can be connected as per the industry standard without extra considerations.
Products November 24, 2020
Artec 3D Handheld Scanners with HD Mode
Powered by Artec 3D's AI neural engine, users can obtain sharp 3D scans with a resolution of up to 0.2 mm. Trained on hundreds of thousands of carefully selected samples, the engine's neural network detects familiar patterns, surface details and shapes. This allows the 3D scanner to reconstruct a higher number of polygons per frame, resulting in 3D data that's both denser and higher quality. Now, the desired HD density can be selected from a standard 1X density up to 36X for Eva (~3 mln polygons per frame) and 64X for Leo (~5 mln polygons per frame).
News November 5, 2020
Studer Machine uses lasers to measure grinding process
Grinding jobs requires strict tolerances. On grinding machines, the tolerances for the dimensions, form and position of finishing processes run tight, and in many cases, shops check these specifications against hard data. Studer machines can use cameras and laser systems to in-process measurements.
Products October 31, 2020
INSPECTOR Torque Wrench
The INSPECTOR meets a requirement that is especially important in the automotive and vehicle manufacturing industry: quality assurance compliant with the VDI/VDE guideline after the fastening process is completed. The new torque wrench also offers an advantage that was never available on the market until now: an interface with the CEUS and testXpert software applications for evaluation and archiving.n
Products October 29, 2020
CD2000 Integrated Camera Display
The 12.5-inch, anti-glare screen has a maximum resolution of 1920 by 1080 pixels with parameter adjustments such as exposure, white balance, and resolution. Other adjustments include freeze, sharpness, record mode, language settings, formatting, color, spectrum image quality, fast preview, image rotation, and customized crosslines, grids, and concentric circles.n
Products October 21, 2020
EL51xx EtherCAT Terminals
The new EtherCAT Terminals acquire incremental signals with high frequencies up to 5 MHz and feature many parameterization options and integrated functions that enable optimum adaptation to control tasks. Each terminal offers an integrated sensor supply, which is parameterizable to 5, 12 or 24 V. Users can easily connect encoders with differential RS422, 5 V TTL or open collector interfaces. Based on internal pull-up resistors, no external wiring is required for open collector analysis.
Products October 17, 2020
SPEETEC
Slip-resistant, without measuring elements, without damaging sensitive surfaces and without wear and tear on tactile sensor elements – the SPEETEC® from SICK is an innovative, non-contact sensor for speed and length measurement of objects moving in a linear path.
Products October 1, 2020
GARANT VG Basic
On the new GARANT VG Basic pre-setting device, both the X and Z axes can be moved by up to 400 millimeters using a pneumatic quick adjustment device. This requires a compressed air supply of at least 73 psi. When an additional fine adjustment is made, the two axes can be positioned accurately enough that the exact tool dimensions can be determined using the robust measuring system and the high-performance CMOS color camera with 17x magnification.
1 … 19 20 21 22 23 … 94

Explore

Address:

121 S. Wilke Rd.
Suite 200
Arlington Heights, IL 60005
Phone:
Email:
Digital magazine delivery:
Author Login | Cookies
© 2026 CTE Publications, Inc. All rights reserved.