Machining

The mill is best suited to machining steel, stainless steel, cast iron, non-ferrous material and materials with difficult cutting properties. This wide range of uses results in lower tooling and administrative costs, as does the fact that its 90° approach angle dramatically decreases the need for finishing operations.

NCSIMUL virtually builds the real-life machining environment to avoid errors, decrease set-up times and switch CNC programs between machines. nnThe 2021 release features a new comparison mode that detects excessive material during a fast and hidden simulation.

TungTurn-Jet toolholders deliver coolant strategically to the optimum position close to the cutting point of the insert. This significantly improves chip control when machining exotic materials that are prone to smearing by effectively breaking the chips into pieces and guiding them away from the cut, which was difficult using a traditional external coolant nozzle method.

ROSCOE, IL (May 5, 2020) - Forest City Gear Co. is proud to announce that its employees have raised $1,300 to support Rockford Rescue Mission's efforts to respond to the increased need brought on by the COVID-19 pandemic. Forest City Gear committed to match employee donations dollar for dollar, raising the total for this most recent fundraiser to $2,600.

We Are Proud to Announce that KItagawa NorthTech has Acquired Tecnaras' Principle Product Lines Through Strategic Acquisition

Rollomatic has developed a process that allows sharpening of thick‐film diamond coated cutting tools. The Rollomatic CNC La‐ ser Cutting Machine LaserSmart incorporates technologies that facilitate the probing the surface of the coated cutting edge to detect the exact shape and position.

Designed for slotting operations between 4-12 mm and cutting-off operations from 4-8 mm, the 335.18 and 335.19 cutters are available in metric diameters ranging from 32 mm to 125 mm. Inch diameters range from 1.25" to 4" with widths from 0.156" to 0.50".

The DeHoff 3060 has a single spindle with a maximum boring capacity of 3 inches (76.2 mm) and a maximum boring depth of 60 inches (1524 mm). To meet the rigorous material removal requirements, the cutting tool is powered by a 40 horsepower spindle motor with a 4-speed gearbox.

Iscar Metals Inc. in early March presented a series of milling and drilling demonstrations during the company's 2020 Milling & Holemaking Seminar at its Tech Center in Charlotte, North Carolina.

The FaceMill-Diamond features an exceptionally high number of permanently brazed cutting edges for its diameter. The cutting edges are designed for a cutting depth of up to 10 mm. Furthermore, the robust tool body absorbs the vibrations generated during machining and prevents damage to the component surface.

Available in lengths of 6, 8, and 10 x Dc and boring bar diameters of 1.25, 1.50, and 2.00 in. (32, 40, and 50 mm) with additional sizes and lengths available on request. Capto C6, C8 connections along with HSK100T connections are also offered as standards.

Beaumont Machine has been working on answers for focusing on the ability to work Realtime with its power supply to control interconnection and closed-loop features. Doing so aids in delivering a better overall quality for the process.