Machining

Products • March 15, 2023

CoroMill Dura

One of the main advantages of the new CoroMill Dura aluminum-specific end mills is their versatile performance in all different types of roughing applications, while also offering finishing capabilities," Wikström continues. "Up to 2×D full slot, pocketing, 5–20° ramping, shoulder milling and more — all with the same end mill.

Articles • March 14, 2023

Reducing part distortion

A German research team has developed a system that can be used to predict and reduce part distortion.

Products • March 14, 2023

Pramet T9415 Turning Grade

With a 30% thicker coating than the previous generation, the Pramet T9415 significantly improves tool durability by increasing resistance to wear and offers higher productivity by allowing for higher cutting speeds. Several testing users of the new grade have reported that their productivity has doubled while machining carbon and structural steels.

News • March 13, 2023

Getting the most out of your boring tools

Fine boring, rough machining, large-diameter boring — no matter the type of application, it is key to get the most from boring tools. Hole-finishing applications, whether at a job shop or a high-production environment, require precision. Here are ways to get the most out of your boring tools.

Products • March 10, 2023

REV Broaching Tools

The REV motorized broaching tool is designed for use on live tool lathes. Single machine set-up eliminates the need for secondary operation or outsourcing. REV tools are ideal for high production runs, offer easy installation and fast processing time. These tools are designed for maximum rigidity, offer long tool life and an excellent finish.

Products • March 10, 2023

Polycrystalline Diamond (PCD) Inserts

The PCD inserts impart the finest surface finishes while shoulder, face and slot milling. The tools enable precise machining with reduced cutting forces and minimal vibration tendencies. They have a low cost because of their extremely long tool life as a result of the cutting edge being made of the hardest known material. In addition, the PCD inserts provide the shortest machining times due to their ability to mill at high cutting speeds. The inserts can be used dry, with emulsion of MQL (minimum quantity lubrication).

Articles • March 9, 2023 • Jeffrey A. Badger, Ph.D.

Analyzing regenerative chatter

The first step to battling chatter is understanding its cause.

Products • March 8, 2023

All-Directional Y-Axis Turning

So how does Y-axis turning work? As the name implies, the new method makes use of the Y-axis, and all three axes are used simultaneously when machining. The tool rotates around its own center, the insert is placed for machining in the Y-Z plane and the milling spindle axis interpolates during turning. This allows intricate shapes to be machined with a single tool.

Articles • March 7, 2023 • Alan Richter

Real-time data shines a light

Machine tool monitoring systems provide real-time visibility of a shop floor.

Articles • March 3, 2023

Drilling deep

Take a deep dive into deep-hole drilling.

News • March 3, 2023

Mastercam’s 2022 Wildest Parts Competition winners

Mastercam announced its 2022 Wildest Parts Competition winners. The Wildest Parts Competition is held each year to encourage student interest and participation in manufacturing.

Products • March 2, 2023

VL30 Series High-Speed Vertical Machining Centers

Available in three models, the VL 30-5X five-axis machining center, and VL 30, and larger VL 50 3-axis versions, this series features a 15 hp 50,000 rpm spindle accepting HSK E25 tooling for precise roughing and ultra-fine finishing. An integrated tool changer holds up to 90 tools.