Machining

Products • November 3, 2022

CoroMill 316

Beyond shoulder and face milling, the end mills can also be used for pocket milling, helical interpolation, ramping and slot milling. The CoroMill 316 is part of the Sandvik Coromant Optimized Solutions offering in the company's solid round tools range.

Products • November 3, 2022

Cast Iron Tooling Columns

Column construction uses stress relieved, class 40 cast iron, with the base and sides milled flat, perpendicular, and parallel within .001"/ft. providing an accurate foundation on which to setup workholding devices or quick-change systems. What does this spec translate to for customer use? Other features include a center locating bore, inch, and metric hole patterns, M12 lifting holes for secure hoist ring attachment.

Products • November 2, 2022

Threaded Plugs, Magnetic Plugs, and Oil Sight Glasses

GN 742.5 Fluid/Fill Drain Plugs, GN 738.5 magnetic plugs and GN 7440 fluid sight glasses are made of AISI 316L (A4) stainless steel. Winco offers the premium sight glass in standard sizes from M16 to M42 and G⅜ to G1¼. Other thread diameters are available on request. Naturally, the same applies to the threaded plugs GN 742.5 and GN 738.5.n

Products • October 27, 2022

CoroTurn Prime B-Type Inserts

CoroTurn Prime B-type inserts are available for external and internal turning in a range of high-performing grades, including the new steel turning grades GC4415 and GC4425. Programming support is available in the most common CAM platforms and with CoroPlus Tool Path for PrimeTurning.

Products • October 27, 2022

TD 110 Tool Breakage Detector

The TD 110 tool breakage sensor can be placed in the work envelope so that it is fast and easy to reach during the tool change. The inductive sensor can detect tools as they pass by while they are spinning at their operational speed. Thanks to its rapid scanning technology, even very small tools made of HSS steel and carbide are detected.

Articles • October 26, 2022 • Craig Zoberis

Evaluating options for automation

As more options come onto the market, choosing what is right for a specific business becomes more challenging.

Products • October 26, 2022

Norton for Aluminum Thin Wheels

Norton for Aluminum wheels have a range of features and benefits including a 5/8"- 11" hub for quick, tool-free wheel changes. Helping to keep metal surfaces clean for defect-free, corrosion-free welding, the new wheels have a contaminate-free bond which does not need any waxes or lubricants. Also, a double coarse layer construction adds versatility and life on applications such as back-grinding and notching. Norton for Aluminum wheels construction is strong and safe, exceeding all the strictest Norton American ANSI and international safety standards.

Articles • October 25, 2022

New shape-memory alloy

Discovery shows the highest operational efficiency thus far for nickel-titanium-base materials

Products • October 25, 2022

Walter Cut G1111-P/GX24 AF5

The system handles axial grooves from dia. 2.362-in (60 mm), cutting depths up to 1.299-in (33 mm), with insert width of 0.197-in (5 mm). The new system delivers maximum productivity and cutting parameters due to optimal cooling, strength and controlled chip breaking, along with high cost-efficiency due to two cutting edges. Axial grooving is effective when the groove depth is 1.5 times greater than the groove width, but to be successful axial grooving requires dedicated tooling and a dedicated chip control insert.

Articles • October 24, 2022

From CAD design to test-fire

Velo3D's Sapphire 3D printing system aids small-satellite revolution.

Products • October 21, 2022

CoroMill MF80

Based on a technology platform similar to the existing CoroMill® 345, this new milling concept offers a 40 percent lighter cutter body with shim protection and a high number of inserts for secure and stable machining, even in vibration-prone overhang applications. The 89.5-degree approach angle enables the multi-edge cutter to work close to the fixture, which not only greatly improves machine utilization, but also ensures a longer tool life with less scrap.

Articles • October 20, 2022 • Christopher Tate

Ream on

Lessons in reaming are shared.