Machining

Kris Zellmann has been named national sales manager for Strausak Inc.

The MVR-Cx series is a simple, easy-to-use machine that efficiently performs single-item and high-mix low-volume production in machining general large parts such as can structures. The newly developed "Nidec Navi" operation support function, which significantly reduces the production time from receiving a job to shipping a product, comes as a standard feature.

The thermal stability is exceptionally high due to an innovative machine design and a rigid 5‐axis configuration. Field tests have demonstrated an unusually high Cpk process capability. This is of particular importance when grinding short‐run custom tooling where accuracy and "first‐tool‐good" are critical.

Manufacturers can achieve 90% machine use reduction with power skiving.

Rollomatic LaserSmart 510. Watch Cutting Tool Engineering's video coverage, featuring original footage and context from the related product, process, event, or shop-floor demonstration.

Strausak ONE machine demo. Watch Cutting Tool Engineering's video coverage, featuring original footage and context from the related product, process, event, or shop-floor demonstration.

The Microlution ML-5 is optimized for micro-scale holemaking and fine cutting, which it performs without creating any heat-affected zones. The machine's compact, high- performance, ultrafast femto laser reduces cycle times and tooling costs to enable the production of precision parts in seconds.

The Mikron MILL P 800 U S allows shops to machine components fully on a single machine and eliminate transfer-related part errors, along with stacked tolerances, for enhanced quality of finished parts. This scalable solution is perfectly suited for automation, with a smaller footprint compared to the Mikron MILL P 800 U.

The M5004 octagon milling cutter combines efficiency and process reliability while also extending tool life, resulting in maximum productivity. Process reliability is enhanced thanks to the new tool's high stability. Lower tool costs and reduced time and labor result from its universal usability and no need for additional finishing operations.

This high-performance end mill is designed with non-overlapping chip splitters along the flute cutting edges. The result is more efficient MRR, while maintaining the ability to make finishing passes. The unequally spaced design feature allows each sequential cutting edge to remove any remaining material left by the chip splitter of the previous flute.

The series includes the VT 1400M, VT 2000M, VT 2500M, VT 3000M, VT 5000 and VT 6000 with table sizes from 1,400 (55") to 6,000mm (236) with maximum turning diameter from 1,600mm (63") up to 7,000mm (276") and maximum height allowed from 1,650 (65") to 4,000mm (157").

Niels Bredick, senior solutions specialist at Sandvik Coromant, is a member of a winning team of the 2020 Henry Ford Technology Award (HFTA) for development and implementation of the Torque Monitoring of Gear Machining Process.