Milling

News • September 21, 2020

Submarines to be built with Australia’s largest machine tool

The Australian Government has ordered the construction of a fleet of 12 regionally superior submarines, known as the Attack Class, for the Royal Australian Navy. A 5-axis gantry machine from The Starrag Group is a critical piece of equipment for the decades-long project.nn

News • September 18, 2020

Production flexibility abounds with new multitasking series

The Integrex i-H series of multi-tasking machines from Mazak was designed to allow for additional automation technologies to be added onto the machine after purchase as a company's production needs grow and change.nn

Products • September 15, 2020

KenTIP FS FEG Insert

Drilling flat-bottom holes is a challenge. So is drilling on inclined or curved surfaces, drilling into cross holes, drilling stacked plates, and drilling into cross holes, stacked plates and castings and other rough surfaces. Not anymore. Leveraging the success of its KenTIP FS modular drill, Kennametal has developed a unique insert geometry (FEG) that streamlines many of these types of applications and simplifies the drilling of counterbores and pilot holes as well.n

Products • August 21, 2020

Expanded MillQuadFeed

MillQuadFeed is a new generation of high feed milling cutters, offering two options of insert geometries that cover various high feed milling application needs. Versatile ZER geometry generates light cutting load at great depths of cut, enabling increased cutting depths and reduced number of machining passes. This is particularly effective to boost productivity in challenging rough milling operations of cast iron where a cutting depth can greatly vary on a single working surface.

Products • July 29, 2020

MEAS High-Efficiency Milling Cutters

The MEAS provides you with a broad range of applications from facing, shouldering, slotting, and profiling to pocketing, ramping and plunging. The sharp insert designs feature Kyocera's proprietary hydrogen-free DLC coated PDL025 grade to maintain excellent wear resistance in aluminum.

Products • July 21, 2020

MC025 Advance and MD025 Supreme Solid Carbide Milling Cutters

The MC025 Advance is available in diameters from 1/8-1 in. (1-25 mm). A single grade is offered for universal applications for steel, stainless steel, cast iron and materials with difficult cutting properties as well as its ability to lower inventory costs.The MD025 Supreme solid carbide milling cutter boasts a high number of teeth for maximum productivity and high-feed face geometry. It is ideal for use on complex components.

Products • July 21, 2020

LTA Filtration Systems

Electrostatic or mechanical filtration systems with an efficiency factor of over 99.9% improve production conditions by reliably protecting employees in their places of work. Reusuable, low-maintenance filter elements increase the sustainability and cost effectiveness for the entire production chain.n

Videos • July 16, 2020

New Light Cutting Face Mill Increases Productivity in Low HP Machines

Tungaloy's TungEight-Mill face milling cutter is for extremely light cutting with low power consumption, perfect for low rigidity and low horsepower machines with a BT-30 connection. TungEight-Mill incorporates single-sided positive inserts with eight economical cutting edges for heavy roughing to mirror finishing of various material faces.

Products • July 10, 2020

VFD & VFD Plus Kits

Made in the USA, both VFD kits are also suited for smaller garage/machine shops, mills, lathes, and grinders. Adaptable to most applications, the VFD kits can run the motor on 220V single-phase incoming power vs. requiring three-phase power – eliminating the need for a phase converter convenient package, it can go up to 5,000 RPMs in high gear–10-15% higher than the standard milling machine could do. Unlike early VFD kits, these provide full-torque at the lowest RPM.

Products • July 3, 2020

Double Turbo Square Shoulder Mills and Inserts

This system features a highly accurate geometry with the most positive helix angle possible to reduce the likelihood of surface mismatches and enable impressive 90-degree angle accuracy. With such precision, finishing cycle times are significantly shortened or, in some cases, completely eliminated. Double Turbo cutters are available in 19 metric variants ranging from diameter 40 mm to 125 mm and 16 inch variants ranging from 1.50" to 5".n

Products • June 28, 2020

Optimized Manufacturing Workflows

As part of its continued effort to provide customers with highly productive turnkey manufacturing systems, GF Machining Solutions has developed a number of model machining cells to showcase its comprehensive range of total manufacturing solutions. These models demonstrate everything from simple pairs of machines and robots to mixed- machine configurations for advanced hybridized additive/subtractive machining strategies.n

Products • June 24, 2020

Sphinx Noventa

Chamfering the entry and exit of 0.80mm to 6.00mm holes can be a tedious, time-consuming process. The Noventa from Sphinx can transform this process using an innovative geometry that improves cycle time, tool life and surface quality.