Milling

Products • November 16, 2017

MP2050 Insert Grade

Seco offers the MP2050 insert grade with an optimized balance of toughness and wear resistance to efficiently machine high-strength, heat-resistant materials. Originally developed specifically for turbine blade machining in the power generation industry segment, the new grade also excels in aerospace applications and offers exceptional performance in milling materials such as austenitic and martensitic stainless steels, as well as titanium.

Products • November 14, 2017

CrazyMill Cool Ball Z4 Finishing Milling Cutter

The CrazyMill Cool products have been developed by the Swiss tool manufacturer Mikron Tool for milling in small dimensions with high performance and quality. Now a new "family member" has been added. It is a four-teeth finishing milling cutter with shank integrated cooling, available in the diameter range of 1 to 8 mm und for milling depths of up to 5 diameters deep.

Products • November 10, 2017

R217/220.28 Milling Cutters

Seco Tools has introduced its R217/220.28 cutters with new body designs that incorporate double-sided round inserts to deliver cost-effective performance, as well as boost productivity. Double-negative-positioning pocket seats of the R217/R220.28 cutters deliver enhanced cutting capability and significant gains in productivity, according to the company.

Products • November 7, 2017

Indexable Punch Broaches and Holders

Slater Tools announces its range of indexable punch broaches and holders to machine shapes in workpieces where rotary broaching may not be feasible. Such cases include (greater) depth of operation, tough materials, tooth height, chip evacuation challenges and applications that require orientation.

Products • November 2, 2017

HARVI III Endmill

It started in 2015, when engineers at a major U.S.-based aircraft manufacturer kicked-off a challenge to determine which cutting tool manufacturer offers the best products for milling forged Ti-6Al-4V titanium. The company invited Kennametal and 10 other global tooling suppliers to the University of Sheffield's Advanced Manufacturing Research Centre (AMRC) in the U.K., where the different teams competed in the challenge.

Products • November 1, 2017

EPPINGER HT-Type Hypoid Gearboxes

EXSYS Tool Inc. has further expanded its EPPINGER gearbox offerings to include the HT-type hypoid gearboxes that feature compact, robust designs suitable for both specific and dynamic applications. The EPPINGER HT-type hypoid gearboxes have monobloc housings that distinguish this series with enhanced stability, precision and efficiency.

Products • October 31, 2017

C 650 Performance Line 5-Axis Machine

Hermle Machine Co. offers a new machine to the North American market. The C 650 is an extension to the Hermle Performance Line series, and the machine builder now provides three machine models for economical 5-axis machining.

Products • October 26, 2017

Tools for Roughing and Finishing Cast Iron

Iron's everywhere. The turbines in those big windmills popping up all over the place. Engine blocks, transmission cases, and turbocharger housings. The pumps that bring water to our faucets and the hydraulic manifolds that put the "move" into earthmoving machinery. Without iron, none of these would be possible. This is why Kennametal has produced cutting tools that make iron machining both cost-effective, efficient, and ensures easy handling.

Products • October 26, 2017

MILLHOG Mini Electric Pipe Beveling Tool

A new, electric portable pipe machining tool that is a powerful alternative to pneumatic tools for end prepping boiler tubes and other pipe fabrication work has been introduced by Esco Tool. The ESCO MILLHOG Mini Electric Pipe Beveling Tool rigidly mounts to the tube or pipe ID and is suitable for end prepping heavy-wall stainless steel pipe and other highly alloyed metals when compressed air is not available.

Products • October 20, 2017

MD133 Supreme Milling Cutter

The new MD133 Supreme milling cutter from Walter, designed specifically for dynamic milling, delivers increased process reliability, particularly during unmanned operation. It reportedly boosts productivity thanks to a higher metal-removal rate and a reduction in machining time.

Products • October 18, 2017

DUO-LOCK Modular Endmill

DUO-LOCK from Kennametal Inc. is a modular endmill with the performance of solid carbide. It uses a proprietary, double-cone locating surface similar to that of Kennametal's KM or KM4X tooling design, assuring "not to exceed" radial runout values of 5 μm (.0002 in.) and Z-axis coupling repeatability of 10 μm (.0004 in.) or better.

Products • October 12, 2017

KCSM40 Grade

Customers have been asking for a new carbide grade to machine titanium 6Al4V at higher cutting speeds compared to increasing feed rates or increasing depth of cuts in that result in increased cutting forces imposed on the workpiece, fixtures and machine spindles. The KCSM40 grade has an advance cobalt binder that provides thermal fatigue resistance without sacrificing the toughness customers have experienced with KC725M or X500.