Milling

Products • February 1, 2014

KSSM8+ Facemills

With eight cutting edges, the new KSSM8+ face milling platform from Kennametal is focused on maximum metal-cutting performance in cast irons and steel workpieces at a low cost.

Products • February 1, 2014

Insert Grade GC3330

Cast iron milling is the next machining area covered by the new grades with Inveio from Sandvik Coromant. Having already introduced the grade GC4325 for steel turning, the cutting tools supplier introduces GC3330, a wear-resistant first choice grade for cast iron milling.

Products • February 1, 2014

Walter Cut SX Grooving and Parting System

Walter USA LLC has introduced the Walter Cut SX grooving and parting system, a flexible new approach for both turning and milling operations that reportedly brings higher levels of reliability, productivity, and tool life to these crucial operations.

Articles • January 1, 2014 • Kip Hanson

Driven to perform

Tips on choosing driven tools for mill/turn centers.

Products • January 1, 2014

Tube Weasel Battery Millhog End Prep Tool

A field-proven, right angle drive I.D. clamping pipe milling tool for performing welding end preps anywhere an air hose or electric cord is unavailable is being introduced by ESCO Tool.

Products • January 1, 2014

MILLHOG Dictator Welding End Prep Tool

An upgraded welding end prep tool for machining high temperature, high pressure pipe used on severe-duty offshore piping systems and shale pumping stations is being introduced by ESCO Tool.

Products • January 1, 2014

OTT_JAKOB Position Monitoring System

Advanced Machine & Engineering Co. introduces the OTT-JAKOB Position Monitoring System with the Electronic Analog Sensor, which allows you to monitor your drawbar for performance and wear.

Products • January 1, 2014

Permanent Magnetic and Rare Earth Coolant Cleaners

Eriez HydroFlow permanent magnetic and rare earth coolant cleaners are for use with surface grinders, gear grinders, honing and lapping machines, broaches, milling and drilling machines, face grinders, oil reclaiming machines and essentially anywhere else clean coolant is needed.

Products • January 1, 2014

WGX Wave Mill Series

Sumitomo Electric Carbide Inc.'s new WGX Wave Mill Series, used for all facemilling applications, features excellent surface finish and eliminates burrs due to a unique insert chipbreaker design.

Products • January 1, 2014

SD-SP15 Slotting and Groove Milling Cutters

ISCAR is introducing the SD-SP15, a new family of narrow slotting and groove milling cutters, featuring 1.25" diameter milling heads with 8 teeth in a width range of .125" — .250" for maximum depth of cut up to .315".

Articles • December 1, 2013 • Susan Woods

Repair or replace?

A guide to when shops should say farewell to used cutting tools.

Products • December 1, 2013

R68 Energy Tube

If moving cables in the workspace of lathes, milling and sawing machines need protecting, cable carriers must be chip tight, while simultaneously guiding the cables with low abrasion. For this purpose, igus has developed its first foldable plastic energy tube, the R68 in the Energy Chain System line of cable carriers.