Product Category

Chucks & Jaws

Optional: narrow results to one content type.
Select one or more.
Select one or more.
Select one or more.
Reset
Videos October 17, 2022
IMTS 2022 Booth Visit with Royal Products
Kendal Glotzbach, a regional business manager for Royal Products, discusses two product debuts at IMTS 2022: a new Combo Chuck and the company's new Royal Z-Lock quick-change workholding system.
Videos October 1, 2022
IMTS 2022 Booth Visit with Huron Machine Products
Tony Wittynghan, sales manager for Huron Machine Products, demonstrates Huron's Quick-Change Jaw System, which allows you to convert your standard three-jaw power chuck into a quick-change chuck.
Products September 1, 2022
M50 MILLTURN
The multifunctional turning-boring-milling center is designed for complete machining of complex chuck and shaft parts up to 670 mm swing over bed. Turning, milling, drilling, hobbing, shaping, gun drilling as well as ID machining can be performed under any angle of the tool. The interpolation of up to 5 axes makes machining of any geometrical profile possible. Large safety windows provide the best possible overview of the working area.
Products August 23, 2022
Quick Load Servo 105 Automatic Bar Feeder
An advanced touchscreen HMI enables automatic, partial changeovers in 15 seconds or less, and one minute or less for complete changeovers. Additionally, the user-friendly HMI uses QR codes for easy servicing, forecasting tools and a 500-part setup library. The bar feeder's newly designed main cover lifts upward for easier access.
Products June 22, 2022
S36 Grinding Machine
The S36 has a fixed grinding head, with grinding wheel angles of 0, 15 or 30 degrees available. The distance between centers is 650mm and the maximum workpiece weight is 150kg. Proven components have been used in the machine. These include a Granitan® machine bed and a workhead with high-precision roller bearings.
Products June 18, 2022
MTS 4.0
In contrast to conventional zero-point tooling systems, monitoring sensors were specifically designed for the MTS 4.0. Each of the four chucks in the MTS 4.0 base plate are equipped with a sensor to check the presence of the workpiece holder and to monitor the actuating piston. There is also a force sensor to measure the clamping power. Similar to previous MTS versions, the chuck is operated with compressed air for opening, re-clamping and cleaning functions.
Products June 18, 2022
CC E-Motion Electric Chuck
Ideal for everyday use, the CC e-motion offers unbeatable accuracy and flexibility for high or low volume turning, inspection and finishing operations while providing fast, seamless machine integration. Optimum for either heavy duty or precision machining of any workpiece geometry, the chuck allows users to not only program the cutting cycle, but the jaw movement and gripping cycle as well.
Products May 21, 2022
3+3 Air Chuck
Ideal to handle the harsh demands of the Oil and Gas industry, BB-FZA2G allows for quick and easy setup of odd shaped pipe for threading and re-threading. Thanks to incorporating three jaws with axial adjustment of the centering position while also using three compensating jaws with extra long rapid and clamping stroke of 1.5", there is no need to re-shim the part. This enhances operator safety and greatly increases overall productivity.
Products March 25, 2022
COMOT-AZ Quick Change Collet Chuck
Effectively used for hard turning, gear grinding, drilling, milling and more, COMOT-AZ provides low deformation clamping of thin-walled workpieces and offers a large selection of standard collets available in round, square, hexagonal, and special configurations when needed for virtually all sizes of spindles.
Products March 22, 2022
40 mm WPS (Workpiece Positioning System) Mini
The economical, easy to use WPS Mini features manual Zero Point clamping that attaches directly to the workpiece, provides maximum holding force of 25 kN and highest repeatability of <0.005 mm. Single quick actuation provides rapid open and closing of the module with only a 270° rotation.
Products January 6, 2022
Ultra-Precision Balance Chucks
When parts rotate without calibration, increased or insufficient pressure occurs, causing errors with the end-product. In a high precision environment, even the smallest difference can have a huge impact on the final product. When the fine tolerances have been exceeded, the result can be expensive and time-consuming repairs.