Drills & Drill Bits

Products • March 22, 2016

Short, NC Spot Drills

Hassay Savage – Magafor has introduced a new line of short, NC spot drills specifically designed for use in Swiss-style machining centers. Made from M2 HSS, they are designed with shorter overall lengths that are well-suited for use with all Swiss-style machines.

Products • March 11, 2016

PFX Cobalt HSS Drills

Dormer PFX premium cobalt HSS drills are available in screw machine, jobber, taper and extra-length designs. Providing options for drilling applications, the PFX is ideal for most engineering materials drilling 3 diameters deep (A920, A921), 6 diameters deep (A900, A901), 10 diameters deep (A940, A941) and 15 diameters deep (A976, A977, A978).

Products • March 3, 2016

CHAMIQDRILL

The ISCAR Chameleon line is back and it's bigger with a diameter range from 1.3"-1.57". The new innovative CHAMIQDRILL employs a new insert positioning and locking mechanism that eliminates the need for clamps or screws commonly found on drills for larger diameters. This design allows for easy indexing on the machine to reduce setup.

Products • March 1, 2016

Walter solid-carbide, through-coolant drill

Walter USA LLC offers a solid-carbide, through-coolant drill for ISO-P and ISO-K materials. The design allows coolant flow to encompass the entire drill point, producing optimal cooling of both the drill and the tool/workpiece interface, according to the company. Controlling the coolant flow contributes to fine surface finishes, helping users avoid reworking holes. More material behind the cutting edge enhances sturdiness and boosts tool life stability and process reliability.

Products • March 1, 2016

Quad Force Machining

Millstar's Quad Force Machining carbide cutting tools provide four cutting actions in one tool. The series uses advanced chipmaking technology that combines geometries for high-speed machining, trochoidal machining, plunge milling, and slide and slot milling, according to the company. The tools are suitable for cutting soft or hard tool and die steel, stainless steel and titanium. The multifunctional design eliminates the need for additional tools, decreases the number of tool changes and simplifies programming.

Products • March 1, 2016

EXOPRO AERO-D-REAM

OSG USA Inc. offers the EXOPRO AERO-D-REAM drill/reamer for cutting carbon and glass-fiber composites. The tool has a tapered 4-flute design to limit peel-up at the hole entrance and an elongated, double-angle geometry to reduce thrust and limit exit delamination. Compared to its uncoated counterpart, the standard diamond-coated tool drilled 14 times the number of holes and provided better hole quality, according to company tests. The diamond-coated tool did not exhibit margin wear after 180 holes.

Products • March 1, 2016

VEX-P tool

Heule Tool Corp.'s VEX-P tool combines a replaceable, solid-carbide, high-performance drill tip and the company's SNAP chamfering system to enable drilling and front and back chamfering in one operation. The cutting geometry creates short chips when machining steel, aluminum and other long-chipping materials and has a helix gullet for chip evacuation. The TiAlN-coated drill tip is self-centering. The tool is available from 11.0mm to 17.0mm (0.433" to 0.669") in diameter.

Products • February 29, 2016

Aqua Drill EX Flat series

Nachi America Inc. says its Aqua Drill EX Flat series provides one-step drilling. The drill eliminates the need for a center drill or endmill on inclined or curved surfaces. The 180° flat cutting edge creates a minimal exit burr. The tools feature the Aqua EX coating for enhanced heat and wear resistance. New fractional sizes will be available in May.

Products • February 29, 2016

Mikron microtools

Mikron Corp. Monroe provides cutting tools from 0.004" (0.1mm) to 0.25" (6.0mm) in diameter for machining stainless steel, titanium, chrome-cobalt and high-temperature alloys. These include the CrazyDrill Twicenter with through-coolant ducts for centering, the CrazyMill Cool through-coolant milling cutter, the CrazyMill Chamfer deburring tools and the CrazyDrill Inox drill, which is available with or without through-coolant. The tools impart fine surface finishes, making secondary operations unnecessary, according to the company.

Products • February 29, 2016

SHEARDRILL solid-carbide drill

Morse Cutting Tools offers the SHEARDRILL solid-carbide drill. With a 140° performance point, the drill machines steel, alloy steel, stainless steel, cast iron and other materials, according to the company. The drill is available in through-coolant (3 and 5 diameters deep) and non-through-coolant (3 diameters deep) versions.

Products • February 15, 2016

Allied Product Selector

Allied Machine & Engineering Corp, Dover, Ohio, recently announced updates to its Product Selector online recommendation tool, according to a Feb. 8 company news release. The web-based selector tool , which customers can use to find new tools to meet their needs or access critical data about their existing equipment, now includes more drilling products from the Allied catalog as well as several new optional machine constraints.

Products • February 3, 2016

SOMEX Deep Hole Drilling Machines

The Suhner Industrial Products Corp., Rome, Ga., recently announced that its SOMEX division offers custom-made deep-hole drilling solutions capable of drilling up to 12mm diameters and as deep as 100x diameter. Utilizing a modular component concept, the SOMEX deep-hole drilling solutions can be integrated directly into transfer machines, special purpose machines or conventional machines.