Machine Tool Attachments & Accessories

Products • July 25, 2017

Electric Vortex AC Quickly Cools Cabinets and Enclosures

Increased ambient temperatures are tough on plant employees and equipment alike, especially sensitive electronics and controls housed within cabinets and enclosures. Vortec introduces Electric Vortex AC models, which are pre-wired, easy-to-install solutions that are operational in minutes to quickly cool sensitive electronics and controls.

Products • July 25, 2017

GN 414 Metric Size, Stainless Steel, Safety Indexing Plungers

J.W. Winco Inc. offers GN 414 metric, stainless steel, safety indexing plungers with pin in protruding position. These RoHS compliant safety-indexing plungers are used when the inadvertent retraction of the plunger pin is to be prevented.

Products • July 14, 2017

N-865 and Q-845 6-Axis Motion Platforms

PI (Physik Instrumente) has engineered and released two new compact multiple-axis positioning stages based on low-profile parallel-kinematic motion devices. Driven by piezo ceramic motors, nanometer precision is achieved along with high stability based on low heat generation and a drift free auto-position-clamping feature.

Products • July 11, 2017

GN 2184 Edge Protection Profiles

J.W. Winco Inc. offers GN 2184 edge protection profiles. The RoHS-compliant GN 2184 edge protection profiles are installed on the front edge of metal sheets and plates, protecting the surfaces from damage by sharp edges.

Products • July 10, 2017

150.10‑JETI Family of Parting-Off Blades and Square-Shank Blocks

Seco Tools line of 150.10‑JETI family of parting-off blades and square-shank blocks now includes a new VDI block design. Adapters directly hold the 150.10-JETI parting-off blades onto the VDI turret and offer streamlined delivery of high-pressure coolant to the cutting zone without the use of hoses.

Products • July 6, 2017

Microset Presetting Devices

Successful machining requires powerful machines and highly-precise tool holding technology, which ensures that the precision is transferred from the spindle right to the cutting tool edge. Within the last couple of years, HAIMER says it has become the complete system provider for tool management.

News • June 28, 2017 • Michael C. Anderson

Capgemini report: Smart Factory investments, expectations are booming

Capgemini's Digital Transformation Institute reports that manufacturers expect investments in smart factories will drive a 27 percent increase in their operation efficiency over the next five years. This would add $500 billion in annual added value to the global economy. Fifty-six percent of surveyed manufacturing executives said their companies have invested $100 million or more in smart factory initiatives over the past five years, while 20 percent claim to have invested $500 million or more.

Products • June 27, 2017

Wall-Mounting Kits for Sinamics G120C, G120 PM240-2 Drives

Siemens announced today the availability of wall-mounting kits for its Sinamics G120C and G120 PM240-2 modular drives. These kits allow easy, fast installation of the drives and conform to NEMA 1 and UL Type 1 standards for interior applications.

Products • June 27, 2017

GN 1024 Metric Size Steel or Stainless Steel Spring Cotter Pins

J.W. Winco Inc. offers GN 1024 metric size steel or stainless steel spring cotter pins.

Products • June 27, 2017

LIP 6000 Miniature Linear Encoder System

HEIDENHAIN's new LIP 6000 miniature linear encoder system, consisting of a scanning unit and glass scale, has the unusual capability to measure to 2 nm resolution with high speed of 4m/sec at long lengths of scale. This encoder was developed with large mounting tolerances, small interpolation error and low noise levels, thereby making the encoder useful in machine feedback applications where very constant speed control is needed or high position stability at standstill is important.

News • June 26, 2017

GROB, Open Mind to host seminar on 5-axis machining strategies

The GROB Group and Open Mind are joining forces to offer a complimentary two-day technology seminar on August 1-2, 2017. Grob, a manufacturer of universal machining centers is partnering with Open Mind, a developer of CAM/CAD systems, to present innovative production solutions for aerospace and other industries at GROB's U.S. headquarters and manufacturing facility in Bluffton, Ohio.

Products • June 26, 2017

ROBA-ES Elastomer Couplings

The backlash-free, flexible ROBA-ES elastomer couplings by mayr power transmission compensate for radial, axial and angular shaft misalignment. They protect the drive system against critical vibrations.