Products

This new feature for multi-axis machining automatically applies a rest finishing cycle to any remaining non-machined areas that could not be reached by the wall and floor finishing operations. The wall and floor finishing operations carry information about which areas can be machined and which areas cannot. The new rest finishing cycle automatically extracts this information from the operations and creates a rest machining area that can be reached using a different tool with automatic tilting.n

AddDoFeed uses minimal Size 02 inserts of 4 mm (5/32″) inscribed circle and offers close pitch cutter bodies that boast unrivaled insert-per-diameter density for a small diameter indexable cutter. This allows a 16 mm (5/8″) diameter body to carry four inserts and 25 mm (1″) seven inserts for higher feed rates and increased productivity.

CAMIO 2021 Geometry Validation reduces the time taken when preparing new inspection programs by automatically detecting which surfaces of the CAD model should be used to measure the feature. It ensures that all measurements are taken on suitable surfaces automatically and at the same time provides the programmer with the option to modify the default settings and selections. While the feature is being programmed, the CAD simulation highlights the geometry used for the validation and previews the measurement sequence. This combines with the Teach Path view to provide a full visual and numerical evaluation of the programming sequence prior to executing the touch points or scanning sequence, enabling the programmer to get the inspection sequence right first time when programming online or offline.

The company has designed new applications for Lantek Flex3D which provide easy solutions when designing and machining complete or partial bevels anywhere in the tube. Further, the latest generation software makes it possible to include perforations of various types (round, rectangular, triangular, etc.), and resolve the multiple possibilities that require a comprehensive library of connections and intersections to later assemble complete sets.

This machining center series can be flexibly configured to completely machine larger-sized structural parts which require maximum surface quality and dimensional accuracy, as well as high production rates and minimal downtime. Users will benefit from the machine's compact layout, available robot or gantry automation, and fully independent Z and X-direction spindles

the PRAB Auto-Take Up automatically monitors tension using load cells on chain conveyors, including steel belt conveyors, drag conveyors, the PRAB ScrapVeyor, and more. The system is wired to a PLC control panel, which monitors tension and automatically tightens the belt to eliminate manual adjustments and downtime. It can be added to new conveyors or retrofitted onto existing models. If retrofitted onto an existing conveyor, the system can be operated using that conveyor's original control panel. Automatic adjustments can be scheduled to be completed during low production times or shift changes.

The HN800-V is uniquely built with the rigidity and accuracy necessary to perform ultra-precise contour machining and boring of components with critical tolerances. The world's first machining center to feature hardened and ground inverted V-shaped slideways, the HN800-V achieves volumetric accuracy of .00005" per foot. The V-shaped slideway system converts the weight of the column unit into restraining force on the sliding unit.

The system was imagined for customers in industries such as agriculture, mining, locomotive, oil & gas or defense who routinely deal with large parts. Before today, the only way to take advantage of modular fixturing's versatility, accuracy and productivitywas to use a larger number of smaller components.

This latest release of software enables the XK10 to take measurements at multiple points along each rail. The benefit of an increased number of measurement points is that the straightness of each rail is also measured at the same time. Parallelism between the rails can then be determined by looking at the difference in straightness at each point, giving a more accurate picture than a measurement of the overall angle between rails.

The Absolute Scanner was developed from the ground up for smart manufacturing applications that require high-speed scanning within automated cells and assembly structures located in-line, near-line or in the quality room. The AS1 delivers scanning accuracy within 50 microns in a 60 meter volume, handheld or automated, with an Absolute Tracker AT960 laser tracker. For small to medium size parts or products, the scanner unit can be mounted to any current-generation Absolute Arm 7-axis system for scanning and hidden area inspection with scanning accuracy of 16 microns within a measurement volume from 2 - 4.5 meters.

CNC Offset Manager runs on Windows and is networked to the Mitsubishi Electric CNC via Ethernet. It also has a feature that allows other automation software or systems to interface with the CNC to fully automate the offset management process, or make the changes from a central cell-management software. This allows software companies to interface their software with Mitsubishi Electric CNC for automation and remote offset management, and allows manufacturers with CNC equipment to automate their machine-tending CNC cells and testing or measuring equipment, or centralize the offset management operation so operators and floor workers can work more efficiently.

Dillon full-grip chuck jaws are made in the USA with industry-leading lead-times. They are ideal for high-speed machining, as well as precision boring, tapping, drilling, and finishing across virtually all industrial markets. In addition to brass, Dillon Full Grip Pie Jaws are available in 6061 aluminum, 1018 steel and cast iron. n