Products

To minimize machine downtime and provide operator safety, these Hydraulic Chucks use a simple hex wrench that requires only two to three turns for both clamping and unclamping. Tightening is complete when the clamping screw hits the bottom; controlling tightening torque is not needed.

Walter's T2710 indexable thread milling cutter can be used universally in steels, stainless steels, cast iron, non-ferrous metals, high-temperature alloys, and hardened steels up to 55 HRC. It machines threads with nominal diameter from 0.79 in. (20 mm), and pitch range of 1.5 - 6 mm/18-6 TPI up to 1.5 x Dn thread depth.

For applications requiring XYZ motion, a motorized vertical linear module can be added at the factory - voice coil motors, linear motors, and screw drive linear modules are available, all with counterbalance or break option. Customizations, such as stage base materials (granite, aluminum, etc), a steel base, or isolators as well as mounting platforms for vision systems, laser heads, galvos or dispensers, etc., are also available.

The Smart Function Kit for Handling can be used in a variety of areas, such as production handling, machine assembly and packaging.

With the release of a new offset CT reconstruction algorithm in the latest version of the manufacturer's Inspect-X software, not only can larger components be scanned but it can also be performed at higher geometric magnification. The Offset.CT module is available on all Nikon Metrology X-ray CT systems from 180kV through to 450kV.

TiNox-Cut End Mills are made from premium ultra-fine micro grain solid carbide with a maximized transverse rupture strength for high impact applications, and produce impressive results compared to conventional end mills. Advanced PVD-applied multi-layered coatings withstand excessive heat and provide superb wear resistance for longer tool life, and tool geometry is designed to produce minimal vibration when machining tough materials.

The "lightest" machine in the FZP line is the new FZP32 with a working range of up to X = 10, Y = 4 and Z = 2.5 meters (393" x 157" x 98"). The user can machine block materials, plastics, as well as CFRP, GFRP and aluminum, among other materials.

This revolutionary new end mill boasts an unequal indexing configuration that reduces chatter for the optimized high efficiency milling of Aluminum Alloys. Designed and engineered from the Alumigator family of high performance aluminum mills, the 5 flute configuration with polished flutes can achieve metal removal rates in excess off 100 cubic inches per minute.

The ToolConnect barcode application uses a barcode scanner at the machine tool to scan the presetter generated barcode. ToolConnect reads and processes the barcode data, displays all tool and process information and then automatically updates the offsets to the correct fields in the control. No operator data entry is required.

Norton Quantum Prime Wheels have several important advantages including a new micro-fracturing grain that has unparalleled sharpness and cutting efficiency which reduces power draw and cycle times, while increasing material removal rates. The unique grain is free cutting, which combined with advanced bond technologies such as Norton Vitrium3, allows Quantum Prime to wear more consistently, improving part quality, geometry and finish even at high material removal rates.

The POWERSTATE Brushless Motor provides 4,000 RPM for consistent power and cut speed on the jobsite. REDLINK PLUS Intelligence ensures maximum performance and protection from overload, overheating, and over-discharge. When equipped a REDLITHIUM HIGH OUTPUT HD 12.0 Battery, the chop saw can deliver up to 200 cuts per charge in 3-5/8" 20-gauge steel stud.

The ZeroClamp Zerolox Zero Point Automation console is the only Zero Point product like it on the market today. It is superior both in repeatability and clamping force to single Zero Point workholding units having only 1 clamping stud with an orientation pin or slot.