Products

Products • June 8, 2021

VpCI-126 Vacuum Bags

These bags take the protection of basic VpCI®-126 Film to the next level by adding an extra barrier against moisture and oxygen for enhanced corrosion inhibition during long-term storage or harsh shipping conditions. The bags can be vacuum-packed and are ideal for automotive build-ahead programs, all-time-buys, or other long-term metal storage applications.

Products • June 8, 2021

Visorguard-LED

Flexbar's Visorguard-LED™ system is water and coolant proof and installs in minutes on CNC mills, conventional mills, drill presses and more. The adjustable Flexbar® arm permits setting of the Visorguard shield at the correct height and angle for each setup, then locks rigid. The special wing-shaped shield flips up to load a part and down for machining. A special spring-loaded shaft allows the shield to stay put with no spring back.

Products • June 5, 2021

Q-DAS eMMA Q-Board

As quality-control processes at separate production facilities are typically disconnected, it can be challenging for global manufacturers to achieve accurate and detailed analyses of quality issues linked to specific components, suppliers, projects, and locations. Through a highly visual, web-based quality dashboard, the new solution enables quality professionals to intuitively analyse aggregate data at a glance from any web browser and rapidly identify cases that require urgent intervention.

Products • June 4, 2021

S70 Gen.2

While retaining its user-friendliness, the latest version of Inspekto's flagship edge device offers new and improved characteristics. The first is the possibility to deploy the system in an even higher number of use cases. As opposed to traditional machine vision solutions, built as a project from multiple components and set to inspect only a specific use case, AMV systems are universal, they include both the required hardware and software, and can inspect a wide variety of parts and use cases. This revolutionary feature has been further extended by the possibility to reliably inspect highly reflective parts, such as metals and plastics.

Products • June 4, 2021

AP 600, AP 400 and AP 250

Most importantly, they are punching square, rectangular and round openings not only in control cabinet doors and housings, but also in mounting plates, terminal boxes, cable ducts or cable routing plates. The three variants AP 600, AP 400 and AP 250 are suitable for processing switch cabinets or switch cabinet doors with a throat depth up to 600 mm, 400 mm, or 250 mm. Depending on the model, the punches can be used on sheet steel with a thickness between 2.5 mm and 3.0 mm. Stainless steel can be processed up to a thickness of 2.0 mm. In addition, the machines from the AP line are punching plastic up to a thickness of 4.0 mm.

Products • June 4, 2021

Tiger AO Cups, Cones and Plugs

The Type 11 cup wheels for grinders are precision balanced to ensure smooth, vibration-free operation and reduce operator fatigue, while wearing at the appropriate level to maximize grind rates. Designed for ID cleaning, hole-edge beveling, smoothing weld seams, bevel grinding, transitioning and grinding in hard-to-reach areas, the Tiger AO cones and plugs for die grinders feature an open-face design that provides an aggressive cut rate right out of the box.

Products • June 4, 2021

PS9xxx Buffer and Redundancy Modules

The PS90xx buffer modules prevent disturbances caused by voltage dips and fluctuations in the electrical grid or by peak loads, so that the power supply units and connected loads can operate reliably and without failure. The PS94xx redundancy modules create a redundant fail-safe supply network. In such a system, two or more power supply units are connected in parallel and decoupled by one or more redundancy modules.

Products • June 4, 2021

BP Chuck

Ideal for CNC lathe applications, BP's large through hole provides tremendous flexibility for virtually any application where a standard chuck is used including: O.D. and I.D. clamping, bar stock clamping and shaft clamping. Easily convert BP to a collet chuck using collet pads for small diameter parts. n

Products • June 3, 2021

MC377 Advance and MD377 Supreme

The MC377 Advance, with protective chamfer, corner radii, and center cutting edge, can be used for chrome-nickel and steel materials, as well as titanium. The MD377 Supreme is a solid carbide milling cutter with a corner radius and central internal coolant engineered for titanium machining.

Products • June 3, 2021

AOV, MFT-R, and PCFC Units

The AOV orbital sander tool is specially designed for grinding and polishing workpiece surfaces. The pneumatic unit is driven by a vane motor and achieves rotational speeds of 10,000 RPM. The MFT-R is the ideal solution for manufacturers who require a particularly flexible and robust polishing spindle for polishing and brushing of workpieces with axial compliance. The PCFC ensures that a consistent compliance force is acting in any position, due to the position sensor.

Products • June 3, 2021

VpCI-148 Grease Resistant Paper

VpCI-148 Paper also presents positive environmental aspects and a worker friendly profile. As paper, it is sourced from renewable materials, whereas common VCI plastics are sourced from fossil fuels. Furthermore, it uses a water-based coating for grease resistance, rather than the wax or poly coatings typically used for barrier papers. VpCI-148 Paper is non-hazardous and free of fluorochemicals, nitrites, phosphates, silicones, chromates, and other heavy metals.

Products • June 3, 2021

2021.04 CAD/CAM Software Components

Users can now define a fixed contact point on the tool that enables the cone and cylinder to be used for deburring. This makes deburring an attractive option for chamfering because the cone and cylinder leave no imprint of the tool's profile. To ensure a uniform chamfer, the tool is not tilted. Instead, to avoid collisions, the toolpath is automatically trimmed in the affected areas.