Products

EVN provides additional benefits over normal grinding oils. Its combination of low viscosity (5.4 cSt) coupled with a high flash point (370 degrees F) is not possible in petroleum based products. That means that EVN improves flushing, which helps grinding performance while also providing the increased safety features.

The compact StyliCleaner, which has a 70mm (2.8in) x 100mm (3.9in) footprint, is available in two sizes, StyliCleaner8 and StyliCleaner16, designed to decontaminate styli from 0 to 8mm (0.31in) and from 6mm (0.24in) to 16mm (0.62in) in diameter, respectively. The separate control unit may be positioned on the CMM table, or if space is limited it can be attached to the CMM stand using an optional mounting plate.

The ANGLED ROUND TOOLHOLDERS position the insert at 30°, 45° or 60° angles for reliefs, undercuts and angled OD and face grooves. Round shank sizes are available in diameters of 1/2", 5/8", 3/4", 1", 20 mm and 25 mm. The ANGLED ROUND TOOLHOLDERS are for use with THINBIT® inserts in grades for ferrous and non-ferrous materials.

BIG KAISER's modular CK/CKB system allows for versatility in the length of tooling combinations, up to a maximum of 10 times diameter and can run on nearly every major spindle interface. All tools are coolant-through and have three different insert holder options per head size. The tried-and-true EWN analog head features a dial with Ø.0005"/div setting accuracy (.0001" w/ Vernier).

Round smooth, round serrated, hex smooth, and square smooth sizes are available for W&S (all sizes), S-style (all sizes), Gisholt, Jones & Lamson, and Martin collet pad types, allowing more varied geometries can be securely gripped. The ability to quickly change between sizes allows shops to expand their machining capabilities, increase their machine cycles by up to 30%, and maximize production. Emergency collet pads that machine like top jaws are stocked for custom workpiece applications.

The XY base system is made of two 3-Phase motor powered V-417 linear stages with travel ranges from 204 to 407mm. Integrated absolute-measuring linear encoders provide better reliability, while eliminating the need to reference. A granite base plate is available for stability and can hold the G-901 EtherCat-based controller with ACS driver module. PI supports customers, system integrators, and machine builders to quickly configure and integrate the appropriate system, reducing design and development time while optimizing the outcome.

Two new grades have been added to TungCut to enhance its capacity in exotic materials: AH8005 insert grade, featuring strong coating adherence to its carbide substrate, eliminates notch wear that typically occurs during the machining of heat-resistant superalloys (HRSAs). New geometries include DGS inserts with 0.05 mm and 0.10 mm (.0002″ and .0004″) corner radii. These sharp cornered inserts allow lighter cutting and precision grooving/ parting-off of small parts advantageous in Swiss machine applications.

The mini version has all the proven centroteX technology, however with an additional advantage: Actuation takes place with just one screw; thus, you save even more set-up time, and this system was designed to enable a robot to quickly change the clamping device. With lesser tightening torque than is required with the large variant, the centroteX M, the centroteX S can be assembled more quickly and this is executed with the highest repeatability and at the same time it also offers more ergonomic operation.

MeasurLink's Collection Scheduler is a module that allows the user to track measurement collection times for multiple active or suspended runs on that Real-Time station. The module displays tiles for each run and shows several color stages based on checkpoints to keep measurements on track. In addition, an email can alert the supervisor if no measurement is started within specified time.

To streamline access to Product Manufacturing Information (PMI) and metadata, hyperMILL® 2021.1 offers a new import function that retrieves face quality information and metadata when importing CAD data from neutral or native formats, and attaches data to the imported faces in hyperCAD®-S, making the information available to hyperMILL® and its machining processes.

The AT960 laser tracker can be transported easily, unpacked quickly and powered up in minutes to deliver high-performance measurement almost anywhere. Featuring wireless communication and a battery operation option, the integrated-technology design of the AT960 reduces setup time drastically.

The PTD HX can deliver up to 70% more holes in moderate conditions. The versatility of the industry's "Go-To" jobber drill extends beyond medium strength materials, delivering 18% more holes in heavy conditions and up to 30% more holes in light conditions.