Products

With an installation of footprint of 25.3m2, the machine is the largest in SW's repertoire. It features a working rage of 3,000 x 1,800 x 875 mm on the X-, Y- and Z-axes respectively.

The new version of the machine offers a more flexible and therefore more precise machining process. The BA W06 features variable spindle distance of 590.00 mm – 651.00 mm. Travel in the Y- and Z- axes 630 mm and 510 mm, respectively. The independent Z-axis enables machining coupled with compensation value.

The FSH combines the latest in substrate and coatings with multiple flutes and the highly effective left-hand helix design to achieve both better performance and longer tool life in today's hard-to-machine materials. Manufacturers who have previously attempted to use taps in small-hole threading understand that, especially in heat- resistant materials, breakage is a frequent occurrence.

EVN provides additional benefits over normal grinding oils. Its combination of low viscosity (5.4 cSt) coupled with a high flash point (370 degrees F) is not possible in petroleum based products. That means that EVN improves flushing, which helps grinding performance while also providing the increased safety features.

The compact StyliCleaner, which has a 70mm (2.8in) x 100mm (3.9in) footprint, is available in two sizes, StyliCleaner8 and StyliCleaner16, designed to decontaminate styli from 0 to 8mm (0.31in) and from 6mm (0.24in) to 16mm (0.62in) in diameter, respectively.

The ANGLED ROUND TOOLHOLDERS position the insert at 30°, 45° or 60° angles for reliefs, undercuts and angled OD and face grooves. Round shank sizes are available in diameters of 1/2", 5/8", 3/4", 1", 20 mm and 25 mm.

BIG KAISER's modular CK/CKB system allows for versatility in the length of tooling combinations, up to a maximum of 10 times diameter and can run on nearly every major spindle interface. All tools are coolant-through and have three different insert holder options per head size.

Round smooth, round serrated, hex smooth, and square smooth sizes are available for W&S (all sizes), S-style (all sizes), Gisholt, Jones & Lamson, and Martin collet pad types, allowing more varied geometries can be securely gripped. The ability to quickly change between sizes allows shops to expand their machining capabilities, increase their machine cycles by up to 30%, and maximize production.

The XY base system is made of two 3-Phase motor powered V-417 linear stages with travel ranges from 204 to 407mm. Integrated absolute-measuring linear encoders provide better reliability, while eliminating the need to reference. A granite base plate is available for stability and can hold the G-901 EtherCat-based controller with ACS driver module.

Two new grades have been added to TungCut to enhance its capacity in exotic materials: AH8005 insert grade, featuring strong coating adherence to its carbide substrate, eliminates notch wear that typically occurs during the machining of heat-resistant superalloys (HRSAs). New geometries include DGS inserts with 0.05 mm and 0.10 mm (.0002″ and .0004″) corner radii.

The mini version has all the proven centroteX technology, however with an additional advantage: Actuation takes place with just one screw; thus, you save even more set-up time, and this system was designed to enable a robot to quickly change the clamping device.

MeasurLink's Collection Scheduler is a module that allows the user to track measurement collection times for multiple active or suspended runs on that Real-Time station. The module displays tiles for each run and shows several color stages based on checkpoints to keep measurements on track.