Products

Products • October 7, 2020

ColWear Vacuum Fused Wear Plates

Wall Colmonoy presents a superior wear plate with lifetime beyond traditional competitors in the marketplace. ColWear plates are produced using proprietary Colmonoy® nickel and Wallex® cobalt alloys, with optional tungsten carbide. Vacuum-furnace production techniques developed over decades have been used to improve the metallurgical properties of the alloy matrix.n

Products • October 7, 2020

TungMeister VFM Milling Head

TungMeister is designed to reduce a significant amount of tool changeover time through the ability to replace used heads instead of an entire tool. Since it takes no more than one minute for tool exchange, setup time can significantly be reduced to as short as one tenth of the time it would typically take to replace solid carbide end mills for maximum productivity and cost effectiveness. With over 13,000 possible head-shank combinations available, TungMeister can readily provide tooling flexibility that enables users to find a solution for almost every application.

Products • October 7, 2020

Screw Jack

AMF presents a flexible, modular screw jack. Various elements can be assembled securely up to the required height in order to fix large and medium-sized components in T-slots and grid plates. The burnished modules made of tempered steel are reliably connected with a threaded ring and allow great flexibility during assembly.

Products • October 6, 2020

RV36 Robotic Gripper

Loaded with features, the compact Kurt RV36 Gripper comes standard with integrated electronics featuring sensors that ensure fingers and parts are in place and ready for production. High-strength aluminum alloy keeps gripper weight to a minimum while a hard-coat finish reduces wear and increases life in the field. Smaller gripper size allows easier storage where space is a premium.n

Products • October 3, 2020

MECHT

The MECHT's unique holder design features a multi-stage insert combination for increased stability, rigid body for increased reliability, and coolant holes over each insert for excellent chip evacuation.

Products • October 3, 2020

MFWN-Mini

The additional cutter designs feature a smaller 5mm D.O.C. insert size with the same cost-efficient, double-sided, 6-edge design from the M-SIX line. The M-Six double-sided, 6-edge insert milling cutters with tough cutting edge due to wide design.n

Products • October 3, 2020

DRV Magic Drill Expansion

With new larger diameters finally available, these high-efficiency indexable drills span from Ø0.500"~Ø2.000" and Ø12mm~Ø60mm sizes.Achieve excellent drilling precision with less variation in hole diameter. The DRV's optimal web thickness design creates low cutting forces and reduces chattering for smooth drilling applications.n

Products • October 3, 2020

PR17 Series Insert Grades

MEGACOAT NANO PLUS technology which provides excellent wear resistance for longer tool life and a high-quality surface finish.n

Products • October 3, 2020

Cam Follower

In heavy-duty cam-driven machines, improper mounting often causes misalignment that produces thrust forces and metal contact between the bearing's outer ring and side plate. Heavy loading also creates deflections and uneven loading at the stud. Heat resulting from metal-to-metal contact can further reduce the cam follower's life.n

Products • October 2, 2020

Special powRgrip Startup Package

The new set of packages allows manufacturers to get started with powRgrip as quickly as possible for their particular toolholding needs. Packages includes a PGC-A handpump clamping unit, five toolholders and 10 PG collets. Holders are available with CAT 40, BT 30, HSK-A63 and HSK-E40 interfaces with standard collets in PH10, PG15, and PG25 sizes. The PGC-A Special Compact Set is also available for separate purchase.

Products • October 2, 2020

Expanded Range of powRgrip ANSI Tap Collets

The expanded range of ANSI tap collets is fully compatible with existing powRgrip holders and only require shanks with tolerances of h9 or better. Manufactured with an internal square, these collets are specifically designed for use on CNC machines with synchronized machine spindle speeds and feed rates.

Products • October 1, 2020

GARANT VG Basic

On the new GARANT VG Basic pre-setting device, both the X and Z axes can be moved by up to 400 millimeters using a pneumatic quick adjustment device. This requires a compressed air supply of at least 73 psi. When an additional fine adjustment is made, the two axes can be positioned accurately enough that the exact tool dimensions can be determined using the robust measuring system and the high-performance CMOS color camera with 17x magnification.