Products

Products • September 25, 2020

Secomax CW100 Ceramic Insert Grades

The CW100 grade expansion encompasses four new round insert formats with two geometries, E-01020 and T-01020, and four grooving insert geometries with widths of 3.175 mm (0.125"), 6.35 mm (0.25") and 7.925 mm (0.312"). An aluminium-oxide-based grade with silicon-carbide whiskers (Al2O3-SiC), the SecomaxTM CW100 grade not only boosts machining speeds in advanced HRSA materials, but it ensures stable and predictable tool life for the lowest possible cost per part thanks to the silicon-carbide whiskers, which use optimized micro geometries for the utmost in ceramic wear resistance and strength.

Products • September 23, 2020

CorShield® VpCI-146 Paper

The paper offers effective protection to ferrous and nonferrous metals, eliminating the need to stock a variety of papers for different metal types. All that is needed is to wrap items in the paper and fold the edges together, using adhesive tape as needed to hold paper in place. The VpCI® coating on the paper vaporizes, reaching all metal surfaces within the package to provide complete corrosion protection with a very thin, very effective VpCI® layer that does not alter product appearance or require removal before further finishing or use. Effective protection is available on both sides of the paper to eliminate packaging guesswork.

Products • September 23, 2020

New DeepTri-Drill drilling depth capabilities

DeepTri-Drill is designed to provide productivity and application security for drilling deep holes on standard machining centers and CNC boring machines, while ensuring easy tool management by eliminating the need for regrinding. The insert features chip splitters that allows effective chip evacuations enabling extremely high feed rates during deep hole drilling in various materials.

Products • September 23, 2020

Digital Twin Technology for CNC Machine Tools

For automation products such as machine tools, a digital twin is a virtual model that uses simulation, real-time data acquisition/analysis and machine learning techniques to allow full evaluation of a machine's dynamic performance before constructing a physical prototype. The same technology can also be employed for customer presentations, virtual commissioning and operator training purposes – and all well before the actual machine itself has even been built.

Products • September 23, 2020

RS-40 Rotary Stage and M-111 Linear Stages

With 360 degree rotation range and 20N load capacity, the RS-40 V7 stage boasts high angular velocity of 20°/sec and minimum incremental motion and repeatability of 87 µrad. The 110, M-111 and M-112 vacuum linear stage series provide travel ranges of 5, 15 and 25mm and are suitable for vacuum up to 10-6 hPa.

Products • September 23, 2020

Automatic Wheel Dresser

Glebar's automatic dresser is available with manual or motorized quill advancement. With motorized quill advancement, it is possible to have a canned dress cycle. Operators can preprogram the frequency of the dress to run after a set number of cycles or time. This allows them to run multiple machines at once increasing their efficiency.

Products • September 23, 2020

AX8000 Multi-axis Servo System with Oversampling Technology

With the highly dynamic, EtherCAT-based AX8000 servo system, new setpoint values can transfer every 62.5 μs from the motion controller in the Industrial PC to the servo drive, along with μs motor current scans. Comparable control systems usually operate with a cycle time of only 1 ms. Now the AX8000 firmware also supports oversampling technology, which is well known from Beckhoff EtherCAT I/O devices. This feature enables multiple samples of process data within a communication cycle with an oversampling factor of up to 128 and the transfer of all data in an array via EtherCAT.

Products • September 23, 2020

No. 1052 1250°F (667°C) inert Atmosphere Oven

This Grieve inert atmosphere oven features 12" insulated walls, all interior seams welded gas-tight, an air jacket on the inner oven for cooling, 16" high integral oven stand, 16-gauge 304 stainless steel interior and enamel-painted aluminized steel exterior. The oven is reinforced for 2000 lb. loads, allowing the customer's part rack to sit on the oven work space floor.

Products • September 23, 2020

OMNIedge System

The OMNIedge network sets up automatically and sensors are simply installed on existing components for convenient and easy remote monitoring of operating conditions. Data is securely collected through a dedicated closed IoT networkfor analysis and to provide alerts. By monitoring and predicting damage and lubrication status, the OMNIedge prevents production delays caused by unexpected machine downtime and enables inventory management. n

Products • September 22, 2020

SGS Round Solid Carbide Tool Libraries

With this collaboration, Mastercam users can download both inch and metric SGS round solid carbide cutting tool libraries from the Mastercam Tech Exchange. The native Mastercam 3D tool databases are fully compatible with Mastercam 2020 and subsequent releases. These offer the latest KSPT innovations and SGS product introductions, including their latest Z-Carb HPR roughing line and H-Carb end mills for Dynamic Milling.

Products • September 22, 2020

Seco Assistant App

Seco Assistant's machining calculator gives you turning, milling and holemaking data for any brand including feeds, speeds and material removal rate. The Tool Comparison function gives you Seco tool recommendations and alternatives to other manufacturer's inserts, while the Suggest function helps you find the right tooling option and cutting strategies for specific jobs.

Products • September 22, 2020

Gear Calculator App

The Gear Calculator App works online and offline, it runs on pcs/notebooks as well on mobile devices with Android and iOS. The App must be connected online to install future updates. Please note that you will need a current browser/version to view the Gear Calculator App. When starting the App for the first time it is necessary to register and log into "MyGleason" (for both the PC/notebook version as well as the Mobile App).