Products

As opposed to measuring, printing a label and punching the data into the control, SPI prints a tool label with a QR code at the presetter that's then read by the SPI module at the machine control. The system can also be configured to send measurements directly into the tool NC's offset table.

Built using SHINE technology (Systematic High-Intelligence Noise Elimination), the RS6 laser scanner always delivers full scanning performance, even on the most challenging surfaces. Whether it's a glossy black plastic automotive body part or a molded carbon-fiber component, this scanner scans without any reduction in quality or productivity.

The CW100 grade expansion encompasses four new round insert formats with two geometries, E-01020 and T-01020, and four grooving insert geometries with widths of 3.175 mm (0.125"), 6.35 mm (0.25") and 7.925 mm (0.312").

The paper offers effective protection to ferrous and nonferrous metals, eliminating the need to stock a variety of papers for different metal types. All that is needed is to wrap items in the paper and fold the edges together, using adhesive tape as needed to hold paper in place.

DeepTri-Drill is designed to provide productivity and application security for drilling deep holes on standard machining centers and CNC boring machines, while ensuring easy tool management by eliminating the need for regrinding. The insert features chip splitters that allows effective chip evacuations enabling extremely high feed rates during deep hole drilling in various materials.

For automation products such as machine tools, a digital twin is a virtual model that uses simulation, real-time data acquisition/analysis and machine learning techniques to allow full evaluation of a machine's dynamic performance before constructing a physical prototype.

With 360 degree rotation range and 20N load capacity, the RS-40 V7 stage boasts high angular velocity of 20°/sec and minimum incremental motion and repeatability of 87 µrad. The 110, M-111 and M-112 vacuum linear stage series provide travel ranges of 5, 15 and 25mm and are suitable for vacuum up to 10-6 hPa.

Glebar's automatic dresser is available with manual or motorized quill advancement. With motorized quill advancement, it is possible to have a canned dress cycle. Operators can preprogram the frequency of the dress to run after a set number of cycles or time. This allows them to run multiple machines at once increasing their efficiency.

With the highly dynamic, EtherCAT-based AX8000 servo system, new setpoint values can transfer every 62.5 μs from the motion controller in the Industrial PC to the servo drive, along with μs motor current scans. Comparable control systems usually operate with a cycle time of only 1 ms.

This Grieve inert atmosphere oven features 12" insulated walls, all interior seams welded gas-tight, an air jacket on the inner oven for cooling, 16" high integral oven stand, 16-gauge 304 stainless steel interior and enamel-painted aluminized steel exterior. The oven is reinforced for 2000 lb. loads, allowing the customer's part rack to sit on the oven work space floor.

The OMNIedge network sets up automatically and sensors are simply installed on existing components for convenient and easy remote monitoring of operating conditions. Data is securely collected through a dedicated closed IoT networkfor analysis and to provide alerts. By monitoring and predicting damage and lubrication status, the OMNIedge prevents production delays caused by unexpected machine downtime and enables inventory management. n