Products

CAD analysis benefits from a new function which improves the suite of analysis-shading modes. Draft Analysis has been added to the existing Undercut and Accessibility shading, performing an on-the-fly analysis of the draft angle. This uses the same technique as in the undercut mode, but extended to more ranges. The colors and angular value of each range can be changed by simply clicking on the colors or numeric labels on the graphics toolbar.

The lathe's small size and footprint make it an excellent option for machine shops needing a second-op machine or additional chuck. Every bed lathe is manufactured and tested to ensure it meets the highest quality and accuracy standards.

The FPL is a very low profile (20mm high) flat pack mounting for size constrained applications. The base is 30mm square, and the laser housing is 18mm x 18mm. With the extended laser unit, the overall length is 45mm. The FPL laser diode module has been fitted with two different mounting options: The 1- ¼-20 threaded mounting hole in the center of the base, or two M4 / 9/16" holes for through base mounting.

Because cleanliness is essential for accurate measuring, the cleaning module runs tools through an ultrasonic bath. After the bath, an airstream – adjusted according to tool length – then dries the tools. After the tools are cleaned and measured, the laser- marking module imparts static or dynamic data on to tool shanks or end faces.

With the new SonoPower 3S megasound system with frequencies of 500 and 1,000 kHz, Weber Ultrasonics has developed an efficient solution for cleaning sensitive components. It ensures especially gentle and yet effective handling of the components with high levels of cleanliness. The system consists of the intelligent SonoPower 3S Megasonic Boost and the matching SonoPlate HF high-frequency transducers.

The Raspberry Pi's low-cost and widely used hardware can contain valuable and protectable data and functions. Swissbit now offers an easy-to-implement safety system based on a long-lasting flash memory suitable for industrial applications. This way, hardware-based security functions can be implemented independently of the CPU and with high flexibility – even retrospectively. The PS-45u-DP-microSD card 'Raspberry Edition' encrypts the data and allows access only via a flexible configurable authentication function, which unlocks further access to the data carrier in the pre-boot phase. The number of permitted invalid access attempts can be configured.n

Greenerd will present unique hydraulic press application solutions at IMTS this year, including discussing an automated 30-Ton Gantry style hydraulic press which was built for an application requiring precise positioning of pins. A linear transducer mounted in the press cylinder enables a minimum depth to be programmed into the control to ensure proper pin depth has been achieved. The 25' long hydraulic press features automated gantry positioning with optical recognition of the distance between each set of pins to be inserted. The cycle can be initiated in autonomous operation where the gantry moves to each pin location and applies the set of tonnage on the pins. n

Another important feature in the latest release of the software is the New Part centering/probing function, which generates pointset nodes for any inspection machine or direct CNC part inspection on a milling machine. Additionally, a new Probe Inspect command creates and exports control points in the CAM project to feed a probing system. There are also specific improvements to part centering tailored for CNC machines with table palletization. n

The Centrifugal Disc Finisher comes in sizes ranging from 4 to 60 liters and most models come with a mobile frame, ideal for cellular & JIT production. A wide variety of additional features are also available including integrated ultrasonic cleaners, on board media storage, a direct compound feed system, and parts separation options.

With the goal of breathing new life into old CNC mills, or turning your mill into a CNC as a cost-effective alternative, SERVO Products Company (Eastlake, OH), a progressive designer and manufacturer of a broad line of manual knee-type milling machine tools and accessories since 1964, recently introduced their Orion CNC Retrofit package for knee mills and lathes. The CNC Retrofit kits; 1000 M (Milling) and 1000 T (Turning), provide quality upgrades while saving the customer money over purchasing a new machining center.n

The e-spool flex increases safety at manual workstations and operating panels. For quick installation of the cable reel, the developers opted for a worm guide. The cable is inserted in a few simple steps, and the e-spool is ready for use.n

Featuring a totally enclosed fan-cooled design in a cast iron frame, this proven design is suitable for indoor or outdoor installation in some of the most demanding environments and applications. Rated as a 75 hp, 460 v, 1800 rpm electric motor, this innovative design delivers 95.0% efficiency at rated load with a near-unity power factor. The NEMA 445T frame motor weighs about 1,920 pounds and draws just 170 amps at full load.n