Products

Products • August 20, 2024

Carbide-Tipped, Serrated Grippers

The body of the hex head style (CTH) is made from a Grade 8 fastener (metric 10.9) steel with a black oxide finish. The round head type (AG) is made from heat-treated alloy steel with black oxide finish. The tool steel threaded style (HS) is made from M-2 high speed steel and hardened to Rc 55/58 with black oxide finish. The carbide-tipped threaded style (PG) is made from heat-treated alloy steel with black oxide finish.

Products • August 20, 2024

NORaX Belts

Norton NORaX N889 belts feature an engineered, high-performance micron-grade aluminum oxide grain structured in a fine 3D pyramid pattern which is especially well suited for lower pressure (0-8 PSI) applications where belt flexibility is needed. The engineered abrasive slowly erodes during grinding, exposing new, sharp abrasive grains resulting in 2-5X longer belt life than conventional polishing belts, as well as higher quality finishes, faster cutting rates and an ability to reduce finishing/ polishing steps.

Products • August 15, 2024

iScanMagic Composite 3D Scanner, iScanLite 3D Blue Laser Line Scanner

Complete with API's iScan3D, iScanMagic and iScanLite represent the most complete scanning portfolio available today. They continue API's mission to offer state-of-the-art scanning solutions for every application need and budget. The entire iScan series is available for demonstration and purchase immediately.

Products • August 15, 2024

OptiLine Six-Flute End Mill

Engineered from the ground up, the OptiLine six-flute end mill features a premium substrate and advanced tool geometry. The end mill's asymmetrical variable helix and variable index flute configuration ensures enhanced stability during cutting operations and includes chip splitters designed for applications involving 2.5 x D cutting lengths. Refined cutting edges and CERATIZIT's Dragonskin coating technology improve chip control and reduce adhesion for longer tool life.n

Products • August 15, 2024

MaxiMill – 211-DC

The MaxiMill – 211-DC has 60% longer tool life compared to tools with standard cooling. Further, despite the complexity of the coolant holes inside the tool body, the MaxiMill – 211-DC is compatible with standard adapters with through-coolant supply without requiring any standard coolant on the chip breaker.n

Products • August 12, 2024

Version 24.05.01 of JETCAM Expert CAD/CAM Software

V24 is all about performance. The 64-bit Preview Release demonstrates a drastic increase in nesting efficiency for our High and Ultra Performance time-based nesting algorithms, delivering much more efficient nests over the same time as a 32-bit system. In addition to core performance changes that will benefit all users, there are new features that will aid specific groups of customers using, punch, laser, routing and knife cutting technologies.

Products • August 12, 2024

Paradur Ti Plus and Prototex TiNi Plus Taps

The Paradur® Ti Plus taps are for threading blind holes with a geometry specially developed for machining titanium alloys with a tensile strength of at least 700 N/mm2 using emulsion instead of oil. The Prototex® TiNi Plus tap is effective for through-hole threading. Walter specially developed the geometry to thread titanium and nickel-based super alloys (ISO S material group) with a tensile strength of 700 N/mm2 or higher using emulsion.

Products • August 12, 2024

8 x 12-inch Bench Lathe

The bench lathe meets the requirements of prototype shops, home machinists, jewelry manufacturing, tool rooms and fabrication and maintenance shops which need to turn small metal parts. Standard on the bench lathe are: 3-jaw lathe chuck, safety chuck and tool post guards, 4-way tool post, centers, chip tray and precision thrust and ball bearings in the head stock.

Products • August 7, 2024

CUT S 400 Dedicated

For faster, easier cleaning, the casting of the CUT 400 S Dedicated is designed so that tank water constantly runs down the interior sides of the work envelope, keeping them wet and preventing EDM residue from drying and hardening. This sticky residue also plays havoc with an EDM's filter and drive systems. To prevent the residue from making its way inside these systems, water also constantly circulates through the new machine's upper and lower heads.

Products • August 7, 2024

Precision Express Program

Precision Express matches an in-house profiling cell with a broad range of on-hand stock, cutting wheel manufacturing and delivery lead times from months to days. Even when gear manufacturers see a spike in demand or need a custom profile at a moment's notice, Weiler Abrasives can provide consistent availability and delivery.

Products • August 7, 2024

Starrett W4900 Indicator

Supporting Industry 4.0, IoT and the Digital Factory, all of the W4900 Indicators will be integrated with the Starrett DataSure 4.0 Wireless Data Collection System for automated wireless measurement data capture and transmission. Attendees can collect and transmit measurement data instantly for analysis to Starrett associates in the booth who will be running the DataSure mobile application, and be available to review the results and discuss any specific application requirements and questions.

Products • August 7, 2024

QCPSS Heavy Duty Sliding Locks

Two tip types of the QCPSS are available: A flat tip that helps minimize damage to an object, and a diamond-surface tip that provides high holding force. Both versions provide 247 lb. clamping force. The clamp body is made from 303 stainless steel. The handle is made from 304 stainless steel. The sliding locks are supplied with two M4 socket head screws for mounting.