Products

Products • November 22, 2019

Korner Zirconia and Ceramic Flap Discs

U.S.-made, premium, right-angle, Korner zirconia and ceramic flap discs are available from Weldcote, a division of Zika Group. U.S.-made, premium, right-angle, Korner zirconia and ceramic flap discs are available from Weldcote, a division of Zika Group. The flap discs feature a unique design where the abrasive material wraps over the edge of the flap disc, allowing the user to grind aggressively into corners and other areas that are tight fits, including fillet welds.

Products • November 21, 2019

XY Single Module Precision Linear Stage Family

In addition to their popular air bearing planar XY stages, a series of integrated XY stages with mechanical bearings is offered by global leader in precision motion systems, PI (Physik Instrumente). These integrated XY stages, engineered for higher loads, are available with 3-phase linear direct-drive motors for higher speed and ballscrews for higher push/pull forces, respectively.

Products • November 21, 2019

S-Type Machine Tools

GMTA, the North American distributor of Profilator, has added new machines using the process modules it already supplies. Profilator is suitable when customers require complex machining processes to be carried out effectively, efficiently and with high precision.

Products • November 20, 2019

Ultra On-Demand Ventilation System

The introduction of IVEC's Ultra on-demand ventilation system is in direct response to the industry's growing focus on energy savings. The new, high-efficiency air quality control system not only significantly reduces energy costs but also improves air filtration, extends filter life and reduces equipment maintenance requirements, effectively improving air quality at a lower total cost of ownership.

Products • November 20, 2019

MSC Apex Generative Design Optimization Software

MSC Software Corp., part of Hexagon's Manufacturing Intelligence division and a global leader in computer-aided engineering (CAE) simulation software and services, announced MSC Apex Generative Design, a new design optimization solution that improves quality through automation of design processes with embedded manufacturing knowledge.

Products • November 20, 2019

Simufact Additive 2020 Software

Simufact, part of Hexagon's Manufacturing Intelligence division and a global operating software company providing process simulation solutions and services to manufacturing industries, announced Simufact Additive 2020. This powerful solution for the optimization of metal-based additive manufacturing (AM) processes now provides cost estimation of the build process, and improves interoperability with Materialize build preparation software and Renishaw printers to streamline manufacturing processes.

Products • November 20, 2019

Software for Direct Energy Deposition Metal Additive Manufacturing

Simufact, part of Hexagon's Manufacturing Intelligence division and a global operating software company providing process simulation solutions and services to manufacturing industries, announced a dedicated simulation solution to help manufacturers improve quality for Direct Energy Deposition (DED) metal additive manufacturing processes.

Products • November 20, 2019

Machine With Servo Automation Technology

Bihler 4Slide-NC Technology advances the goal of an injury-free, OSHA-complaint, manufacturing facility. Job safety is among the most critical factors in protecting the most valuable asset of a manufacturing company - its employees. A safe working environment promotes a positive and productive culture, all the while enhancing company morale and building employee retention. Studies of manufacturing safety have shown that a safe work environment can boost productivity levels by as much as 83%.

Products • November 20, 2019

#9680191 Vertical Machining Center

Machine shops looking for a "second-op" machine can depend on Palmgren's vertical machining center for a compact solution. The 7-inch by 24.5-inch center is ideal for production lines, short runs, one-offs and prototyping.

Products • November 19, 2019

Command Intelligent Software

The air filtration industry just got smarter thanks to the introduction of IVEC Command intelligent software, a comprehensive air quality monitoring and troubleshooting program. IVEC Command allows for offsite monitoring and control of air filtration systems from any geographic location.

Products • November 19, 2019

C-THRU4.0 Data Management Software

Marposs has announced the availability of its new data management software — C-THRU4.0, designed to collect and process data from multiple machine tools equipped with Artis machine monitoring systems via a central hub. This information can be accessed remotely, via an iPad, computer or laptop as well as offering the ability to integrate with MES and higher level ERP systems. The data collected can be used to analyze tool life, machine capability and cost comparisons, as well as alarm tracing and counts, profit and loss accounting, profitability analysis and more, all leading to enhanced productivity and profitability.

Products • November 19, 2019

IL+ Ironless Linear Motors

ETEL, a direct drive motor manufacturer of the Heidenhain Group, now offers updated ironless linear motors optimized for electronics and semiconductor manufacturing. Called the IL+ product lines, these motors are offered in the same profile as ETEL's previously established ironless linear motors but now specially re-designed to allow for increased performance to benefit these two industries.