Products

HEIDENHAIN introduces a new sealed angle encoder that can be used as an alternative to modular angular encoders for use in motion control machining applications that require a larger than usual through-hole. Called the RCN 6000 series, these new absolute sealed angle encoders with integral bearings have an exceptionally large hollow shaft diameter of 180mm (7.09 inches), allowing larger scale machines to take advantage of high resolution and signal quality that's expected from HEIDENHAIN angle encoders.

Vortec has updated their online heat load calculator, allowing users to determine cooling requirements for their specific enclosure. The new tool, available at https://www.vortec.com/heatload/calculator allows users to input enclosure dimensions, compressed air inlet temperature and pressure, current cabinet temperatures, worst case ambient temperature and whether the enclosure is in direct contact with sunlight (and enclosure color).

Updated 3D machining functions top the bill for engineering companies in the latest release of Alphacam. Users of Alphacam 2019 R1 will find two major enhancements for 3D Machining – firstly, what Brand Manager Hector Henry says is a much-improved Automatic Collision Detection algorithm, which avoids gouging non-machined faces and surfaces in the Select Solid Faces function.

MarkinBOX has released a new battery-operated, cordless part marker called Patmark. With a lithium-ion battery and charger, plus a software app that connects to your device via Wi-Fi, you can get a clean and clear mark without a cord.

The Kennametal APX series of ROCTEC nozzles provide 20 percent greater life than the industry-leading ROCTEC 500 waterjet series, which already significantly outperforms other conventional tungsten carbide nozzles. The APX nozzles are suitable for use in precision cutting applications where long, uninterrupted cuts or close tolerances must be maintained for long periods to maintain part integrity or minimize expensive scrap due to premature nozzle failure.

EXOR has taken the harsh environment eTOP500 series and updated it with the recently released eX700 series. This natural progression allows you to combine a high-performance sunlight readable display with state-of-the-art connectivity, such as OPC UA.

Radiac Abrasives Inc. announces a new superabrasive stocking program, including a Tool Room superabrasive assortment and VNX2 wheels, which are in stock and available to ship within 48 hours.

The new EDGE2 DSS system from DAPRA Corp. was engineered to deliver both premium 90° milling performance and indexable milling value. Double-sided DSS inserts provide four usable cutting edges to significantly lower cost-per-edge versus single-sided inserts, and DAPRA's permanent automatic cutter replacement program makes it easier for shops to keep good-condition tools in use rather than making do with worn-out cutters.

BIG KAISER is expanding its range of BIG Capto toolholders with the addition of a new size, C4, which is becoming increasingly popular as a quick-change system for turret tooling on lathes.

Motion controller output speeds are reaching an industry-leading 50 µs/5 axes with the introduction of the new CK3M programmable multiple-axis controller from Omron. The company combined enhanced motion control capability originally developed by Delta Tau Systems (now part of Omron) with its own advanced design technologies inside a compact and streamlined housing.

The XR3 6-axis drive rack with field replaceable, front-mounted, 3U plug-in amplifiers support both linear and PWM topologies. The XR3 can control any combination of brushless, DC brush or stepper motors at up to 320 VDC operating voltage and 30 A peak current capability. Both the current loop and servo-loop are digitally closed to ensure the highest level of positioning accuracy and rate stability. This processing capability allows the XR3 to provide loop closure rates up to 20 kHz and to handle both digital and analog I/O processing, data collection, process control and encoder multiplication tasks in real time.

The new air-operated Burn Table Lift Magnet System from Eriez easily and quickly moves multiple parts or cut-outs up and off of burn tables. With a powerful magnetic circuit design, this advanced transfer system can also lift single sheets or plates up to 3" thick from a stack to load the table.