Products

Products • May 4, 2017

Industrial Robotic Calibration & ISO-based Performance Test Solution

Hexagon Manufacturing Intelligence announced its new solution for the calibration and performance testing of industrial robot systems. The RoboDyn software package, created in collaboration with the developers of SpatialAnalyzer, works in conjunction with a Leica Absolute Tracker to allow for the direct calculation of robot characteristics such as base and tool alignments and full DH parameters.

Products • May 4, 2017

AquaBlue Alkaline Detergent

Madison Chemical introduces AquaBlue, an alkaline detergent for general floor cleaning. This water-based degreaser has excellent penetrating and wetting properties, allowing fast removal of dirt, oil, grease, tire marks and other soils from industrial floor surfaces–even painted ones.

Products • May 4, 2017

Grinding Machine Remanufacturing Services

GCH Machinery says it has both the machine tool remanufacturing experience and know-how to take your older machine and restore it to the original OEM specifications (and beyond) using the most modern mechanical and electronic technology available. The result is a high-precision machine or grinding cell that has been remanufactured to your exact requirements, fully supported by GCH Machinery's technical staff.

Products • May 4, 2017

Hi-M G1 Vertical Machining Center

Hwacheon Machinery America Inc.'s new Hi-M G1 vertical machining center is specially designed to cut graphite. Its quick and precise performance makes it an ideal choice for dry cutting graphite electrode material used in die mold work, according to the company.

Products • May 4, 2017

QNP3 Series XYZ Piezo Positioning Stages

Aerotech's QNP3 series XYZ piezo positioning stages combine sub-nanometer resolution, high dynamics and excellent geometric performance in a compact three-degree-of-freedom (DoF) package. They come with a 40 mm x 40 mm clear aperture with closed-loop travels up to 100 µm x 100 µm x 10 µm (open-loop travels to 120 µm x 120 µm x 12 µm).

Products • May 4, 2017

VB-1400/VB-1600/VB-2000 Vertical Machining Center

The VB-1400/VB-1600/VB-2000 vertical machining center from Cubic Machinery has a 10,000-rpm spindle, 24-tool automatic toolchanger and spindle oil cooler.

Products • May 4, 2017

Program Templates for Industrial Automation

Robotiq offers new tools to help collaborative robots beginners save a lot of time programing their robot. Program templates are available and ready to be downloaded on Robotiq's online resource center. They simplify the robot's programming so it can be put to task in a record time.

Products • May 3, 2017

MicroTurn A/S

The advanced MicroTools for precise internal turning and copying operations.

Products • May 3, 2017

Custom Grab Bar Peening Machine

Guyson just completed a custom grab bar peening machine for the commercial restroom industry. The cabinet was equipped with 100" linear actuator with encoder to blast parts up to 105". The part enters the cabinet and is rotated at high velocity while (4) pressure nozzles blast the part to create a selective etch.

Products • May 3, 2017

Wide Range of Workholding Products

Dillon Manufacturing offers a wide range of workholding products, including soft jaws, hard jaws and full grip jaws for Serrated, T & G, Acme, and Square Key-type chucks, as well as collet pads. Full grip "pie" jaws from 6 to 24 inches in diameter, as well extra high jaws to 10 inches in height for longer service life are available, as are collet pads and collet pad jaws, monoblock jaws, and vise jaws.

Products • May 3, 2017

Metal Loss Monitor

MRF/MSW operators can utilize the advanced Eriez Metal Loss Monitor (MLM) to continually scan their residue stream for metal that has escaped the process and is headed for landfill disposal. By taking the guesswork out of metal recovery, the MLM gives users the ability to observe the performance of their systems for variations over time and make adjustments required to improve metal recovery and boost profits.

Products • May 3, 2017

MarCom Professional Metrology Software Version 5.2

Mahr Federal will offer its MarCom Professional metrology software version 5.2 as a free download from the Mahr.com website. MarCom 5.2 is a full-featured metrology software interface for connecting measuring instruments by cable or wireless.