Products

Products • October 31, 2016

VA-L 500 Circular Cold Saw

Behringer Saws Inc. has added the VA-L 500 to its line of circular cold saws. Behringer Eisele GmbH designed the VA-L 500 sawing system specifically for production cutting of aluminum and nonferrous materials.

Products • October 31, 2016

RB-9 Robotic Blasting System

Guyson has just completed another one of its popular RB-9 robotic blasting systems. The customer had a demanding surface preparation specification that could only be achieved by precise robotic gun manipulation and part fixturing and the use of high-performance model 75/12 media cyclone.

Products • October 31, 2016

Portfolio of ISO Tools for Milling Operations

MAPAL offers a broad portfolio of ISO tools for milling operations. A new series of cutting materials has been developed especially for the milling of the whole bandwidth of cast iron grades – GJL, GJV and GJS.

Products • October 31, 2016

Multi-bladed Fine Boring Tool with Guide Pads

MAPAL has developed a multi-bladed fine boring tool with guide pads. Thanks to the multiple cutting edges, the cycle time is significantlynreduced compared with single-bladed tools.

Products • October 31, 2016

Tshcorn Line of 3D Testers

Euro-Tech Corporation is the North American distributor of the Tshcorn line of 3D testers. The most popular model, the SLIMplus analog 3D-tester can remain wet in the toolchanger—without any damage; impervious to splash water and oil.

Products • October 31, 2016

Tiger UltraCut Thin Cutting Wheels

Weiler Abrasives Group has announced a new product in its Tiger bonded abrasives lineup. The new Tiger UltraCut thin cutting wheels deliver fast cuts, long wheel life and consistent performance—with a true 1mm thickness.

Products • October 28, 2016

Color Select High-Speed Inserts

Cast iron drilling has taken a significant step forward with an expanded insert range for new diameters in the high-speed Color Select P6005-WKK45C grade for Xtra·tec B401x point drills. These new inserts are available in diameters up to 1.50 in. (37.99 mm). With this expansion, the grade specially developed by Walter for machining cast iron can now be used to drill all holes from 0.47 to 1.50 in. (12 to 37.99 mm) in diameter at depths up to 7×Dc and holes from 0.71 to 1.02 in. (18 to 25.80 mm) in diameter at hole depths up to 10×Dc.

Products • October 28, 2016

TRU TEMP Low-Temperature, Black-Oxide process

Gear component manufacturers can easily achieve break-in lubricity, robust corrosion protection and galling resistance on critical components. Birchwood Technologies' TRU TEMP low-temperature, black-oxide process meets demanding finishing requirements while creating a non-dimensional finish, maintaining the same material hardness and load-bearing properties.

Products • October 28, 2016

Stabilizer 2.0 Endmills

Niagara Cutter, a subsidiary of Seco Tools LLC, launched its new Niagara Cutter Stabilizer 2.0 next-generation family of endmills. The Stabilizer 2.0 cutters incorporate patented continuous variable asymmetrical geometries and provide incredibly smooth and chatter-free performance that allows feed rates to be doubled as compared with previous models.

Products • October 28, 2016

SA Series of Cutting Tools and Inserts for Grooving, Parting

Arno Werkzeuge USA announced the introduction of its SA series of cutting tools and inserts for grooving and part-off or cut-off operations for North America. The SA system from Arno USA is a modular grooving system with a single toolholder, which turns into different tool variants by simply changing the support blade and clamp.

Products • October 28, 2016

MITGI 2016 Standard Tool Catalog

Midwest Industrial Tool Grinding Inc. has released the newest edition of the standard tool catalog. The largest edition published by MITGI, the catalog includes more than 8,700 tools, an increase of 57 percent over the 2015 offering.

Products • October 28, 2016

HV5HD Series Endmills

Mil-Tec Inc. says its HV5HD series endmills are ideal for machine shops and other manufacturing facilities that require flexibility and value. With a full range of cutter bodies and precision-ground carbide inserts, the tools can reportedly handle any application and material.